Wheel axle with closed groove ball bearings (Ø 29 mm) for the rear spoke wheel on your Puch moped / moped.
The rear wheel axle includes all required washers, nuts and spacers.
The dimension of the long spacer is 78.5 mm.
- green cable tie: brake anchor plate
- Blue cable tie: swingarm
- Red cable tie: wheel hub
Note: When mounting the ball bearings, make sure that the long spacer bush is clamped between the two bearings without any play. This is the only way to ensure that the inner rings of the bearings press correctly onto the bushing. If this is not observed, the bearings will inevitably become distorted.
| Diameter | 29 mm |
| Ø inside | 12 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | MF12x1 (fine pitch thread) |
| Ø outside | 29 mm |
| Width across flats | 19 mm |
| Ø shaft | 19 mm |
| Shank length | 100 mm |
| Total length | 190 mm |
| Thread length | 29 mm, 53 mm |
| Ball bearing closed | Yes |
| Puch |
Ratings
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Thread depth: 10 mm · Height: 10 mm · Width across flats: 19 mm · Strength class: 8
EUR 2.40
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12 mm · Thread type: MF12x1 (fine pitch thread) · Ø outside: 29.02 mm · Total length: 165 mm · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread length: 40.5 mm · Thread length: 50 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats: 19 mm
EUR 46.40
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing type: Deep groove ball bearing · Inner ring width: 9 mm · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Plastic · Material: Steel · Surface: blank · Ø inside: 12 mm · Width: 9 mm · Ø outside: 29.02 mm · Ball bearing closed: Yes
EUR 10.60
66HEROES pointed nut "Spike" M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 8.20
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Wheel size: 16 - 17 " · Wheel size: 17 " · Valve type: TR4 Auto valve · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 "
EUR 11.80
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12 mm · Thread type: MF12x1 (fine pitch thread) · Ø outside: 29.02 mm · Total length: 165 mm · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread length: 40.5 mm · Thread length: 50 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats: 19 mm
EUR 46.40
Hot 
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.80
swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 34.5 mm · Surface: galvanized (blue) · Height: 5.9 mm · Height: 9.9 mm · Ø shaft: 11.95 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Ball bearing closed: Yes
EUR 46.40
Collection only possible with online purchase and appointment.
