Drive mechanism for the speedometer housing on the left side, compatible with your Zündapp ZL25, ZS25, ZX25, ZD10, ZD20, ZD25, ZD30, ZD40, ZD50, ZE40, ZR10, ZR20, ZR22, or ZR30 moped, as well as the CS50 moped with chassis numbers 446, 447, 448, 460 and engine types 250, 278, 280 with 17-inch wheels.
The speedometer drive, with a cast aluminum housing, is mounted on the left side of the front wheel and features two tabs for mounting and locking.
The diameter of the axle bore is 12 mm.
A threaded hole is machined into the housing for maintaining the speedometer drive or for applying grease to the speedometer worm gear. The appropriate grease nipple is included in the delivery and is already installed.
You can find compatible speedometer cables and the appropriate grease gun in the accessories section.
Original Zündapp part number: 446-16.600
| Material | Aluminum |
| Wheel size | 17 " |
| Ø outside | 47.5 mm |
| 4-edge speedometer cable | 1.8 mm |
| Ø mounting hole | 12.1 mm |
| Ø axle | 12 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Nominal diameter (thread) | 12 mm |
| Total height | 18.5 mm |
| Zündapp OEM number | 446-16.600 |
| Zündapp | ZR 10 / ZR 20 / ZR 22 / ZR 30 / ZB 22 (type 250-447) ZD 10 / ZD 30 (type 250-466) ZD 20 / ZD 25 / ZD 40 / ZD 50 (type 278-446) CS 25 / CS 25 Hai (Type 278-448) CS 50 / CS 50 Hai (type 280-448) ZA 25 / ZA 40 (type 250-460) ZL 25 / ZS 25 / ZX 25 / ZE 40 (type 278-460) |
Accessories & related products
VDO speedometer cable (38 - 100 cm) black (1A quality)
Manufacturer: VDO · 4-edge speedometer cable: 1.8 mm · Color: black · Thread type: MF10x1 (fine pitch thread) · Outer shell length: 380 mm · Outer shell length: 450 mm · Outer shell length: 500 mm · Outer shell length: 550 mm · Outer shell length: 600 mm · Outer shell length: 650 mm · Outer shell length: 680 mm · Outer shell length: 700 mm · Outer shell length: 750 mm · Outer shell length: 800 mm · Outer shell length: 850 mm · Outer shell length: 900 mm · Outer shell length: 950 mm · Outer shell length: 1000 mm
EUR 12.90
Explore categories from Speedometer & drive
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø wire: 2.4 mm · Ø inside: 25.5 mm · Length spring hook: 50 mm · Ø outside: 30 mm · Leg length: 45 mm · Material: Spring steel · Surface: galvanized (blue) · Total length: 125 mm · Area of application: Original · Area of application: Standard
EUR 5.80
swiing® revival seal Float SRE, SRC, SRF, SRA
Ø inside: 41 mm · Ø outside: 45 mm · Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.35
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 12.90
EUR 28.67/l
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Ø inside: 17.2 mm · Ø outside: 20 mm · Manufacturer: BING · Material: Rubber · Surface: raw · Color: black · Place of use: Carburetor · Number of components: 1 pcs · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.45
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Ø outside: 11.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Total length: 185 mm · Width across flats: 19 mm · Ø shaft: 11.9 mm · Shank length: 100 mm · Thread length: 26 mm · Thread length: 52.5 mm
EUR 17.70
Working late? Evening hours on Thursday until 20:00
