Extravagant custom license plate holder suitable for your Puch moped / moped with Swiss number plate.
The CNC-milled, black anodized number plate holder with «Puch» laser engraving is designed so that the number plate can simply be inserted and screwed to the number holder using the screws supplied.
Alternative number holders and various mounting pins for attaching the license plate to the wheel axle or to the bumper bolt can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Color | black |
| Manufacturer | 66HEROES |
| Mounting type | Nuts & bolts |
| Hole spacing | 50 mm |
| Ø mounting hole | 5.2 mm |
| Material | Aluminum |
| Surface | anodized |
| Total length | 153 mm |
| Width | 111 mm |
| Height | 8 mm |
| Thread type | M4x0.7 (standard thread) |
| Thread length | 12 mm |
| Number of fixing points | 2 pcs |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Color: blue · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.00
EUR 2’600.00/l
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Width: 58 mm · Height: 29 mm · Total length: 110 mm · Mounting type: Screwed clamp · Number of fixing points: 1 pcs · Thread length: 10 mm · Thread type: M5x0.8 (standard thread)
EUR 29.50
66HEROES Custom number frame "mofakult" black (CH version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Color: black · Total length: 7 mm · Width: 111 mm · Height: 153 mm · Thread type: M4x0.7 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 50 mm
EUR 47.30
66HEROES spring washer & M4 cam number holder Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M4x0.7 (standard thread) · Thread length: 12 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 4.5 mm
EUR 16.30
Explore categories from Number holder
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut
EUR 11.80
Not in stock
Hot
swiing® revival side protection screw set black | Puch Maxi S
Surface: galvanized (blue) · Surface: raw · Color: silver · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.30
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.9 mm · Total length: 185 mm · Shank length: 100 mm · Ø outside: 11.8 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Thread length: 26 mm · Thread length: 52.5 mm
EUR 17.70
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Width: 58 mm · Height: 29 mm · Total length: 110 mm · Mounting type: Screwed clamp · Number of fixing points: 1 pcs · Thread length: 10 mm · Thread type: M5x0.8 (standard thread)
EUR 29.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
