ADDY clutch disk (inner plate) suitable for your manual moped / moped with Sachs 503 2AL / 2BL engine.
The clutch plate is suitable for the ADDY 4-plate racing clutch. The clutch lining based on sintered material is the third of three stages and corresponds to the modern, uncompromising lining. Increased wear on the steel plates, but best transmission performance.
The clutch facings are manufactured in an environmentally friendly way and are made from environmentally friendly materials.
Facing thickness: 3.5 mm
Price per piece - you need 4 pieces for the clutch.
Alternative clutch linings and other attachments can be found under accessories.
Quality product of the brand ADDY by Schöb Engineering.
| Thickness | 3.5 mm |
| Manufacturer | ADDY |
| Area of application | Tuning |
| Material | Composite materials |
| Ø inside | 63.5 mm, 68.5 mm |
| Recording type | Interlocking |
| Ø outside | 94 mm |
| Number of slats | 4 pcs |
| Sachs | 503 - 2AL / 2BL |
Accessories & related products
Hot 
3-plate clutch | Sachs 503, 50/2 (502), 50/3, 50/4
Manufacturer: Made in Europe · Material: Composite materials · Material: Steel · Recording type: Interlocking · Ø inside: 29.6 mm · Ø inside: 35.3 mm · Number of slats: 3 pcs · Thickness: 3.8 mm · Number of springs: 9 pcs · Ø outside: 110.5 mm · Area of application: Tuning
EUR 490.40
ADDY clutch plate (4-plate clutch) red cork-rubber (stage 2) | Sachs 503
Manufacturer: ADDY · Material: Cork · Material: Rubber · Recording type: Interlocking · Number of slats: 4 pcs · Thickness: 3.5 mm · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Ø outside: 94 mm · Area of application: Tuning
EUR 11.70
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.70
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.70
EUR 26.00/l
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Place of use: Carburetor · Area of application: Standard · Material: Rubber · Color: black · Surface: raw · Number of components: 1 pcs · Ø inside: 17.2 mm · Ø outside: 20 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.40
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Area of application: Standard · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 10 mm · Stock number: BO15 · Ø inside: 15 mm · Ø outside: 40 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.40
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Width across flats (trigger): 27 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats Screw: 19 mm · Total length: 57 mm · Strength class: 8.8
EUR 23.50
Large gasket set with shaft seals Engine | Sachs 503
Area of application: Standard · Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Ø outlet inside: 13.3 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40
EUR 47.20
Collection only possible with online purchase and appointment.
