Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
Carousel Image 5
logo_addy

For: Puch

35371

ADDY exhaust S100F

Home
| Motor
| Exhaust system
| Complete systems
EUR 290.90

Incl. 21% VAT.

Special, hand-made S100F racing exhaust system for your Puch moped / moped with E50 engine and straight exhaust outlet.

This racing exhaust is ideal for cross or racing use and generates a strong power band, especially in the mid to upper speed range. In contrast to the H100A and H100+, this snail muffler allows even more flow and provides even more torque thanks to the 25 mm passage at the cylinder connection.

Note: We recommend using nuts with a height of 18 mm for fastening to the exhaust.

Other complete racing systems as well as engine cases, cylinder kits and the nuts mentioned can be found in the accessories section.

Quality product from the ADDY by Schöb Engineering brand.

Details

ManufacturerADDY
Colorblack
MaterialSteel
Surfacevarnished
Total length840 mm
Ø Silencer55 mm
Exhaust typeSnail
Mounting typeStud bolts & nuts, Nuts & bolts
Flame tube attachmentFlange
Number of fixing points3 pcs

Suitable for the following models

Puch

E50

Accessories & related products

Nut M6 extra high galvanized

Universal

12256

Nut M6 extra high galvanized

Material: Steel · Drive: External hexagon · Nut type: Hexagon nut 3D · Height: 18 mm · Surface: galvanized (blue) · Area of application: Standard · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread)

EUR 2.20

Parmakit 45 mm cylinder kit 70 ccm large ribs | Puch
undefined

For: Puch

18067

Parmakit 45 mm cylinder kit 70 ccm large ribs | Puch

Nominal diameter: 45 mm · Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning

EUR 279.30

Hot Hot
swiing 44 mm cylinder kit CH12 camouflaged | Puch
undefined
angle-right

For: Puch

24300

swiing 44 mm cylinder kit CH12 camouflaged | Puch

Nominal diameter: 44 mm · Manufacturer: swiing · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Outlet type: straight · Camouflaged: Yes · Number of fixing points: 4 pcs

EUR 116.30

Set
Metrakit 43.5 mm cylinder kit (65 cc - camouflaged) | Puch
undefined
angle-right

For: Puch

28688

Metrakit 43.5 mm cylinder kit (65 cc - camouflaged) | Puch

Manufacturer: Barikite · Manufacturer: Metracite · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 38 mm · Nominal diameter: 43.5 mm · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Camouflaged: Yes

EUR 157.10

ADDY GME engine housing "der.pruefstand" Edition | Puch E50
undefined

For: Puch

35283

ADDY GME engine housing "der.pruefstand" Edition | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 500.50

ADDY GME engine housing spindled "der.pruefstand" Edition | Puch E50
undefined

For: Puch

35285

ADDY GME engine housing spindled "der.pruefstand" Edition | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 558.70

ADDY engine housing spindled 4-bearing | Puch E50
undefined

For: Puch

35303

ADDY engine housing spindled 4-bearing | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 465.60

ADDY exhaust H100A+
undefined

For: Puch

35372

ADDY exhaust H100A+

Manufacturer: ADDY · Material: Steel · Surface: varnished · Total length: 870 mm · Color: black · Ø Silencer: 55 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Number of fixing points: 3 pcs · Flame tube attachment: Flange

EUR 314.20

ADDY exhaust H100A | Puch
undefined

For: Puch

35376

ADDY exhaust H100A | Puch

Manufacturer: ADDY · Material: Steel · Surface: varnished · Total length: 820 mm · Color: black · Ø Silencer: 55 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Number of fixing points: 3 pcs · Flame tube attachment: Flange

EUR 290.90

Moped fans like you also bought:

Return spring brake plate | Puch Maxi

For: Puch

10028

Return spring brake plate | Puch Maxi

Spring design: Nose feather · Spring design: Torsion spring · Total length: 125 mm · Length spring hook: 50 mm · Leg length: 45 mm · Area of application: Original · Area of application: Standard · Material: Spring steel · Surface: galvanized (blue) · Ø wire: 2.4 mm · Ø inside: 25.5 mm · Ø outside: 30 mm

EUR 5.70

Magura cable clamp Ø 8 x 15 mm
undefined

For: Universal · Puch · Sachs

10057

Magura cable clamp Ø 8 x 15 mm

Total length: 15 mm · Manufacturer: Magura · Area of application: Standard · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Thread length: 7 mm · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Ø outside: 8 mm

EUR 2.90

Large outlet seal with metal ring

For: Puch

10113

Large outlet seal with metal ring

Area of application: Tuning · Material: Sealing carton · Material: Sheet metal (steel) · Place of use: Outlet · Reinforced: Yes · Ø outlet inside: 27 mm · Ø screw holder: 6.3 mm · Thickness: 2.1 mm · Hole spacing outlet: 42.5 mm

EUR 3.50

GPO sprocket 12 teeth (wide) | Puch
undefined

For: Puch

10117

GPO sprocket 12 teeth (wide) | Puch

Manufacturer: GPO · Surface: Hardened · Material: Steel · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 12 pcs · Recording type: Interlocking · Total thickness: 4.6 mm · Ø inside: 13.7 mm · Ø inside: 16.9 mm

EUR 9.30

swiing® revival snap ring low control bearing set (version 2.0)
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10143

swiing® revival snap ring low control bearing set (version 2.0)

Height: 7 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Sachs OEM no.: P0521 · Puch OEM number: 349.1.30.015.1

EUR 2.90

Racing swingarm chrome | Puch Maxi S, Puch X30 NG-2A
undefined

For: Puch

10153

Racing swingarm chrome | Puch Maxi S, Puch X30 NG-2A

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 360 mm · Width: 165 mm · Wide intake: 125 mm · Height: 125 mm · Area of application: Racing

EUR 81.40

Not in stock

Magura set screw M6x34 mm lock nut SW8
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo · Cilo

10170

Magura set screw M6x34 mm lock nut SW8

Slotted: No · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Total length: 34 mm · Thread length: 24 mm · Thread type: M6x1 (standard thread) · Ø Receptacle: 7.05 mm

EUR 2.90

GPO rubber for swingarm mounting | Puch Maxi S, X30
undefined

For: Puch

10216

GPO rubber for swingarm mounting | Puch Maxi S, X30

Total length: 90 mm · Manufacturer: GPO · Material: Rubber · Color: black · Ø inside: 24 mm · Ø outside: 32 mm · Ø outside: 37 mm · Puch OEM number: 349.1.21.509.1

EUR 11.50

swiing® revival shock absorber axle galvanized | Puch Maxi S
undefined

For: Puch

10253

swiing® revival shock absorber axle galvanized | Puch Maxi S

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 200 mm · Thread type: M8x1.25 (standard thread)

EUR 7.55

Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10273

Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm

Total length: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm

EUR 2.30

excitement
  • Youtube
  • Facebook
  • Instagram
excitement-mobile
PrepaymentInvoiceVisaMastercardPostFinancePayPalTWINTKlarna