38 mm cylinder head, compatible with your Puch Maxi S / N, Supermaxi LG1 / LG2, and your X30 Sport NS / NL moped with an E50 / ZA50 (air-cooled) / ZA50 (catalytic converter) or Z50 engine.
The gray combustion chamber cover is perfectly suited for the corresponding AKOA 38 mm cylinders as well as for other 50 cc cylinders and features an optimized combustion chamber compared to the original. The original design is harmoniously echoed by the cast-in Puch stamp on the underside.
It is important to note that there is no decompression hole.
You can find the matching cylinder head gasket, installation hardware, and our recommended spark plugs in the accessories section.
Brand-name product from the manufacturer AKOA.
Original Puch part numbers: 325.1.10.001.1, 349.1.10.101.1, 349.1.10.301.1, 349.3.10.101.1, 349.4.10.001.1
| Total length | 132.2 mm |
| Width | 123.2 mm |
| Manufacturer | AKOA |
| Material | Aluminum |
| Ø cylinder | 38 mm |
| Number of fixing points | 4 pcs |
| Height | 54.5 mm |
| Candle thread | short |
| Area of application | Tuning |
| Decompressor | No |
| Hole pattern [mm] | 44 x 44 |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm gasket cylinder head 0.4 mm aluminum | Puch
Place of use: Cylinder head · Nominal diameter: 39 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Ø cylinder: 38 mm · Thickness: 0.4 mm · Ø inside: 39 mm · Ø screw holder: 7 mm · Hole pattern [mm]: 44 x 44 · Puch OEM number: 349.3.10.013.1
EUR 2.95
swiing® revival Stud Bolt Set M6x106 | Puch
Diameter: 5.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Nominal diameter (thread): 6 mm · Drive: External hexagon · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
Ripp-Lock washer M6 6.2/14/1.4 galvanized
Material: Steel · Surface: galvanized (blue) · Nominal diameter inside: 6 mm · Nominal diameter (thread): 6 mm · Thickness: 1.4 mm · Ø outside: 14 mm · Ø inside: 6.2 mm · Thread size: M6 · Pony OEM number: A1542 · Alternative version of the Pony OEM number: A1644 · Sachs OEM no.: 0244 021 000 · Alternative version of the Sachs OEM number: 0245 023 002
EUR 0.85
Explore categories from Cylinder
Moped fans also bought
Hot 
swiing® revival 12 mm carburetor "original" | Puch
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Standard · Carburetor type: SRE · Choke control: Hand choke · Total length: 65 mm · Nozzle thread: M3.5x0.6 (standard thread) · Width: 50 mm · Nozzle size: 52 · Height: 108 mm · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Color: gray · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.15 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 82.90
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Ø External connection: 20 mm · Total length: 46 mm · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.40
Working late? Evening hours on Thursday until 20:00
