38 mm tuning cylinder in the "Power Edition" version made of aluminum with 50 cc displacement suitable for mopeds / mopeds with Sachs 503 2AL, AAL, 2BL, ABL CH engine.
The tuning kit is made of cast aluminum with nickel silicon carbide coating (colloquially known as Nikasil).
The tuning kit made of cast aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) offers a good increase in performance over the entire speed range, with a focus on low speeds and high torque. Compared to the original cylinder, the sealing has been removed on this tuning cylinder and the intake has been enlarged. The overflow channels as well as the exhaust and intake have been adapted to optimize the timing. In addition, the exhaust duct has been designed at a more favorable angle. All housing covers can still be fitted.
| Manufacturer | AKOA |
| Material | Aluminum |
| Camouflaged | No |
| Surface | Nickel silicon carbide (colloquially known as Nikasil) |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 38 mm |
| Ø cylinder neck | 45.5 mm |
| Ø Outlet outside | 25.9 mm |
| Ø Inlet inside | 15.8 mm |
| Ø outlet inside | 20.5 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Ø piston pin (B) | 12 mm |
| Decompressor | No |
| Outlet type | clamped |
| Area of application | Tuning |
| Number of fixing points | 4 pcs |
| Hole spacing inlet | 32 mm |
| Sachs | 503 - AAL , ABL , 2AL / 2BL |
Ratings
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Total length: 66 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 94.80
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
EUR 213.50
Not in stock
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 260.90
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 50 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Ø inside: 15 mm · Thread type: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
EUR 59.20
swiing® ingenious decompressor set | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Copper · Material: Steel · Thread type: M10x1.5 (standard thread) · Thread length: 14 mm · Ø outside: 14 mm · Total length: 21.5 mm · Width across flats: 14 mm · Area of application: Standard · Sachs OEM no.: 0291 013 300
EUR 67.50
AKOA 38 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 38 mm · Ø outside: 84 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: M10x1.5 · Height: 29 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 71.10
AKOA 38 mm cylinder head "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 38 mm · Ø outside: 84 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: No · Height: 29 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 59.20
Not in stock
AKOA 41 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Camouflaged: No · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 213.50
Not in stock
AKOA 40 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Camouflaged: No · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 40 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 213.50
AKOA 43 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Camouflaged: No · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 272.80
Explore categories from Cylinder
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm
EUR 14.80
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Width: 130 mm · Total length: 200 mm · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
EUR 6.40
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Total length: 66 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 94.80
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: black · Width: 68 mm · Filter type: Racing screen · Height: 52 mm · Total length: 165 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 71.10
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 50 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Ø inside: 15 mm · Thread type: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
EUR 59.20
AKOA 38 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 38 mm · Ø outside: 84 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: M10x1.5 · Height: 29 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 71.10
AKOA 38 mm cylinder head "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 38 mm · Ø outside: 84 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: No · Height: 29 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 59.20
Not in stock
AKOA 38 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 38 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 249.00
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
