45 mm tuning cylinder with 70 cc displacement and narrow exhaust for your Pony moped / moped with Sachs 503 AB, AC or ADV engine.
The wide-bore racing kit has been extensively reworked compared to the original cylinder. The overflow channels, intake and exhaust have been enlarged. The racing cylinder is designed for high engine speeds. Due to the longer exhaust timing, a high dynamic pressure is therefore required in order to exploit the full power.
In addition to the piston, piston ring, clips and pin, the scope of delivery also includes the required gaskets for the base, intake and exhaust. In addition, an O-ring and a reinforced graphite gasket for the cylinder cover are included, which can be used as required. It is still possible to use the original cylinder head.
Cylinder material: Cast aluminum
Piston material: Cast aluminum
Bore: 45 mm
Capacity: 69.98 cm³
Ø Cylinder neck: 52 / 50.5 mm
Exhaust port inside: 19.5 x 11 mm
Ø Exhaust port inside: 29 mm
Exhaust thread: M6 x 1
Hole spacing exhaust port: 50.5 mm
Hole spacing inlet: 36 mm
Inlet thread: M6 x 1
Ø inlet inside: 23.5 mm
Hole pattern: 56 x 56 mm
Ø stud bolt hole: 6.9 mm
Piston pin: 12 mm
Decompressor hole: yes, MF12x1.25 mm
Note: The inlet of the cylinder has a double hole pattern, so that sockets for both the AB / AC and the ADV engine can be fitted.
The narrow outlet is designed for AB / AC exhausts. A flame tube from the AB / AC engine must therefore also be fitted to the ADV engine.
This tuning cylinder is powerful and can wear out the gearbox and other engine parts more quickly. Please be aware of this when purchasing the 45 mm version.
Matching add-on parts for the cylinder set can be found in the accessories section.
Alternative to the original Pony spare part number: A2868
Branded product from the manufacturer AKOA.
Details
| Manufacturer | AKOA |
| Material | Aluminum |
| Surface | varnished, Nickel silicon carbide (known as Nikasil®) |
| Displacement | 70 ccm |
| Crankshaft stroke | 44 mm |
| Nominal diameter | 45 mm |
| Ø cylinder neck | 52 mm, 50.5 mm |
| Ø outlet inside | 29 mm |
| Ø Inlet inside | 23.5 mm |
| Ø piston pin (B) | 12 mm |
| Thread inlet | M6x1 (standard thread) |
| Area of application | Tuning |
| Hole spacing inlet | 36 mm |
| Outlet type | slanted |
| Hole spacing outlet | 50.5 mm |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | MF12x1.25 |
| Alternative version of the Pony OEM number | A2868 |
Suitable for the following models
| Sachs | 503 - AB, AC, ADV |
Accessories & related products
swiing® revival gasket set | Sachs 503 AB, AC wide wall
Number of components: 21 pcs · Manufacturer: swiing® revival parts · Material: Aluminum · Material: Copper · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 24 mm · Hole spacing outlet: 38.5 mm · Hole pattern [mm]: 56 x 56
EUR 53.20
swiing® revival gasket set | Sachs 503 ADV wide wall Cat.
Number of components: 15 pcs · Manufacturer: swiing® revival parts · Material: Copper · Material: Fiber · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 23.3 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 56 x 56 · Decompressor: No
EUR 53.20
AKOA wide wall 38 mm cylinder kit original | Sachs 503 AB, AC, ADV (A2868)
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (known as Nikasil®) · Surface: varnished · Area of application: Standard · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Nominal diameter: 38 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø Outlet outside: 23 mm · Inlet window: 18x7 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 11 mm · Ø outlet inside: 19.5 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 50.5 mm · Outlet type: slanted · Hole spacing inlet: 36 mm · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Pony OEM number: A2868
EUR 355.00
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 59.10
AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø inside: 20 mm · Ø External connection: 24 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 59.10
AKOA wide wall 38 mm cylinder kit Sport | Sachs 503 AB, AC, ADV (A2868)
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (known as Nikasil®) · Surface: varnished · Area of application: Performance · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Nominal diameter: 38 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø Inlet inside: 23.5 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 29 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 50.5 mm · Outlet type: slanted · Hole spacing inlet: 36 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 56 x 56 · Decompressor: MF12x1.25 · Alternative version of the Pony OEM number: A2868
EUR 355.00
Not in stock
AKOA decompressor M12x1.25 wide wall | Sachs 503 AB, AC, ADV (A2942)
Manufacturer: AKOA · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: MF12x1.25 (fine pitch thread) · Total length: 66 mm · Thread length: 8 mm · Width across flats SW: 15 mm · Pony OEM number: A2942
EUR 94.60
swiing® ingenious gasket outlet Ø 23 mm graphite | Sachs 503 AB, AC
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Material: Steel · Place of use: Outlet · Color: gray · Thickness: 2 mm · Ø inside: 23 mm · Number of fixing points: 2 pcs · Hole spacing: 48.5 - 51.5 mm
EUR 10.50
Moped fans like you also bought:
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Total length: 6 mm · Drive: Slot
EUR 18.80
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Total length: 200 mm · Width: 130 mm · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
EUR 6.40
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Width: 50 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Choke control: Hand choke · Nominal diameter: 15 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 94.60
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 59.10
AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø inside: 20 mm · Ø External connection: 24 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 59.10
Collection only possible with online purchase and appointment.
