Athena racing cylinders for Sachs 504 (with modifications), 505, 508, and 535 engines, which were installed in Hercules Prima M, 2, 3, 4, 5, and Optima mopeds, among others.
Thanks to the large intake port, overflow ports, and exhaust port, this tuning cylinder delivers a significant increase in performance.
Cylinder Specifications:
- Inner diameter of intake manifold: 15 mm
- Intake manifold connection diameter: 20 mm
- Inner diameter of exhaust flange: 20 mm
- Exhaust flange connection diameter: 25.7 mm
- Distance between stud bolts on exhaust flange: 50 mm
- Exhaust flange thread diameter: M8
- Cylinder neck diameter: 51.6 mm
- Stroke: 44 mm
- Bore: 45.0 mm
- Thread for decompressor: M10 x 1.5 mm
The intake manifold and exhaust flange are included in the scope of delivery.
Note:
Spark plugs with long threads must be used.
For Swiss 504 engines (42 mm stroke), the following modifications must be made to the cylinder:
- Adjust the cylinder base and gasket as shown in Figure 5.
- The cylinder base must be turned down to readjust the compression ratio due to the shorter stroke. We recommend setting a squish gap of 0.8–1.0 mm.
- On models with an external clutch lever, the intake manifold must be extended; otherwise, the carburetor may come into contact with the clutch lever.
- The Athena adapters included in the kit do not fit these cylinders, as they only have an M6 hole. We therefore recommend ordering a compatible swiing® adapter.
It is well known that the Athena exhaust flange included in the cylinder kit can only be installed with laborious adjustments due to incorrect bores and a missing gasket. The swiing® exhaust adapter comes with a gasket and the appropriate countersunk screws and solves this problem without the need for any modifications. Please pay attention to the installation direction during assembly. The piston is inserted with the arrow pointing toward the outlet on the exhaust side.
You can find the components mentioned above for smooth installation, along with other tools, in the accessories section.
A quality product from the Italian manufacturer Athena.
| Manufacturer | Athena |
| Material | Aluminum |
| Camouflaged | No |
| Area of application | Tuning |
| Surface | sandblasted |
| Nominal diameter | 45 mm |
| Crankshaft stroke | 44 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 51.7 mm |
| Hole spacing inlet | 31.5 mm |
| Ø Outlet outside | 25.9 mm |
| Ø outlet inside | 19.5 mm |
| Ø Inlet inside | 14.3 mm |
| Inlet window | 23.4 x 12.6 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing outlet | 50 mm |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 56 (61) x 56 |
| Outlet type | straight, clamped |
| Thread outlet | M8x1.25 (standard thread) |
| Decompressor | M10x1.5 |
| Sachs | 505 (with pedal shaft) - 1A (AT) , 2A (HG) , 2B (HG) 508 - 1 A 535 |
| Hercules | Great - 2 , 3 , 4 , 5 , Optima |
Accessories & related products
NGK B8ES spark plug long thread
Manufacturer: NGK · Candle designation: B8ES · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Width across flats: 21 mm
EUR 7.70
Not in stock
Athena piston 45 mm #A | Sachs 504, 505
Manufacturer: Athena · Ø outside piston (A): 44.92 mm · Compression height (C): 28.2 mm · Total piston height (E): 45.2 mm · Number of piston rings (F): 1 pcs · Nominal diameter: 45 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Tolerance group: A · Weight piston kit: 98 g
EUR 82.90
NGK BR8EIX Spark plug long thread interference-suppressed Iridium
Manufacturer: NGK · Candle designation: BR8EIX · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Width across flats: 21 mm · Spark plug socket: M4 · Spark plug socket: SAE · Electrode material: Iridium · Suppressed: Yes · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 31.90
swiing® ingenious exhaust adapter 26 mm Athena cylinder | Sachs 504, 505, 508
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 22 mm · Ø outside: 26 mm · Ø mounting hole: 8.3 mm · Hole spacing: 50 mm · Total length: 67 mm · Width: 43 mm · Height: 25.5 mm
EUR 29.50
swiing® ingenious exhaust adapter 24 mm Athena cylinder | Sachs 504, 505, 508
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 20 mm · Ø outside: 24 mm · Ø mounting hole: 8.3 mm · Hole spacing: 50 mm · Total length: 67 mm · Width: 43 mm · Height: 25.5 mm
EUR 29.50
Explore categories from Cylinder
Moped fans also bought
Nos
Hot 
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Color: silver · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 11.80
Hot
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.80
NGK B8ES spark plug long thread
Manufacturer: NGK · Candle designation: B8ES · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Width across flats: 21 mm
EUR 7.70
Not in stock
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Place of use: Crankshaft · Ø inside: 15 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C · Width: 5.5 mm · Sachs OEM no.: 0230 111 100 · Pony OEM number: A5602
EUR 9.40
Oil seal NBR 15/35/7 AS crankshaft | Sachs 504, 535 (A4214)
Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Sachs · Material: NBR · Place of use: Crankshaft · Ø inside: 15 mm · Ø outside: 35 mm · Temperature resistance (min.): -30 - 100 °C · Width: 7 mm
EUR 10.60
NTN 6202 Ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Ø inside: 15 mm · Ø outside: 35 mm · Width: 11 mm · Inner ring width: 11 mm · Manufacturer: NTN · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: Sheet steel cage ball-guided · Groove ring: No · Material: Steel
EUR 8.20
Working late? Evening hours on Thursday until 20:00
