Blade-cooled 43 mm (61 cc) cylinder kit with 12 mm piston pin, suitable for your Sachs 50, 502, 50/2, 50/3, 50/4 moped / moped.
The timing of the cylinder was kept rather low, which is characterized by a very nice torque in the lower speed range.
The racing cylinder kit without sealing includes cylinder & piston kit without gaskets.
- Grey cast iron tuning cylinder with & 43.0 mm bore
- Slot-controlled
- 17x15 mm intake, 31 mm stud spacing
- Optimized overflow channels
- 2-piece outlet
- Improved control times
- No spindling of the engine housing necessary (Ø cylinder neck 46.0 mm)
- Exhaust thread: M40 x 1.5 mm
- Hole pattern for stud bolts: 60 x 40 mm for CH engines
- Pre-drilled hole pattern for stud bolts: 51 x 40 mm for DE engines
- Cylinder head hole pattern: 37 x 37 mm
- Incl. Ø 43 mm piston from the Italian manufacturer -GOL-
Note: 60 mm long M6 stud bolts must be used to mount the cylinder. Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Detailed assembly instructions are included.
Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.
Made by the BADASS brand.
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Camouflaged | No |
| Displacement | 61 ccm |
| Crankshaft stroke | 42 mm |
| Nominal diameter | 43 mm |
| Ø cylinder neck | 46 mm |
| Ø Outlet outside | 40 mm |
| Inlet window | 17 x 15 mm |
| Ø piston pin (B) | 12 mm |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Ø outlet inside | 28 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole pattern [mm] | 60 x 40 / 51 x 40 / 37 x 37 |
| Outlet type | Union nut |
| Hole spacing inlet | 31 mm |
| Thread outlet | MF40x1.5 (fine pitch thread) |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Diameter: 4.9 mm · Total length: 23 mm · Thread type: M5x0.8 (standard thread) · Nominal diameter (thread): 5 mm · Thread length: 6 mm · Thread length: 12 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.15
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Color: silver · Number of components: 12 pcs · Drive: External hexagon · Total length: 34 mm · Screw head: Hexagon · Ø shaft: 5.85 mm · Thread type: M6x1 (standard thread) · Shank: Yes · Nominal diameter (thread): 6 mm · Shank length: 8 mm · Width across flats: 10 mm · Strength class: 10.9 · Thread length: 22 mm
EUR 5.80
swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Standard · Ø cylinder: 41 mm · Place of use: Cylinder head · Ø inside: 41.7 mm · Thickness: 0.3 mm · Hole pattern [mm]: 37 x 37
EUR 5.80
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Width: 95 mm · Height: 50 mm · Ø outside: 98 mm · Total length: 127 mm · Ø cylinder: 41 mm · Hole pattern [mm]: 37 x 37 · Area of application: Standard · Candle thread: long · Number of fixing points: 4 pcs · Ø screw holder: 19 mm · Decompressor: M10x1.5
EUR 81.30
NC-Motorparts 41 mm Cylinder Head Tuning | Sachs 50/3, 50/4 LKH
Manufacturer: NCMotorparts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Ø outside: 128 mm · Ø cylinder: 41 mm · Candle thread: long · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Decompressor: No
EUR 115.00
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Decompressor: M10x1.5
EUR 177.90
Explore categories from Cylinder
Moped fans also bought
swiing® revival exhaust nut M40x1.5 for 32 mm pipe, galvanized | Sachs
Manufacturer: swiing® revival parts · Material: Steel · Thread type: MF40x1.5 (fine pitch thread) · Nut type: Union nut · Ø inside: 33.5 mm · Surface: galvanized (blue) · Ø outside: 46 mm · Height: 19 mm · Nominal diameter (thread): 40 mm
EUR 16.50
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Color: silver · Number of components: 12 pcs · Drive: External hexagon · Total length: 34 mm · Screw head: Hexagon · Ø shaft: 5.85 mm · Thread type: M6x1 (standard thread) · Shank: Yes · Nominal diameter (thread): 6 mm · Shank length: 8 mm · Width across flats: 10 mm · Strength class: 10.9 · Thread length: 22 mm
EUR 5.80
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Nominal diameter: 17 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Width: 85 mm · Choke control: without choke · Height: 100 mm · Total length: 132 mm · Ø fuel hose connection: 6 mm · Mounting type: Flange · Hole spacing inlet: 31 mm · Nozzle size: 76 · Mixed oil connection: No · Vacuum connection: No
EUR 150.60
EUR 135.10
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Decompressor: M10x1.5
EUR 177.90
Working late? Evening hours on Thursday until 20:00
