A supposed 19 mm Bing SRF replica carburetor.
The passage is slightly conical, so that the diameter is 19 mm on the outside, but only slightly larger than 17 mm in the middle.
The carburetor is not of the same quality as original Bing products, but is a good and inexpensive alternative.
Sink block is for nozzles with M4 thread.
ØAir filter screen: 60.2 mm
Connection diameter to intake manifold: 23 mm
Mounted nozzle size: unknown
| Carburetor type | SRF |
| Component group Carburetor | Carburetor complete |
| Nominal diameter | 17 mm |
| Ø Internal connection | 23 mm |
| Mounting type | Plug connection clamped |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 60.2 mm |
| Area of application | Tuning |
| Ø fuel hose connection | 6 mm |
| Choke control | Hand choke |
| Nozzle thread | M4x0.7 (standard thread) |
| Puch |
| Zündapp Belmondo |
| Kreidler |
Ratings
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
EUR 32.60
Inox
Hot 
Bumm mirror round Inox
Manufacturer: Bumm · Test mark: none · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Total length: 360 mm · Mirror rod length: 300 mm · Thread type: M8x1.25 (standard thread) · Clamping diameter: 22 mm · Thread size: M8
EUR 33.10
swiing® revival nozzle set M4 (70 - 90) Bing 18, Bing 85
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Drive: Slot · Quantity: 11 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90
EUR 26.00
66HEROES Air filter mushroom grille black Dell'Orto SHA (Ø=60 mm)
Manufacturer: 66HEROES · Mounting type: Bride · Mounting type: Plug connection clamped · Material: Metal · Camouflaged: No · Material: Rubber · Area of application: Tuning · Color: black · Filter type: Grille · Total length: 46 mm · Length rubber part: 18 mm · Ø Internal connection: 60 mm · Length of filter section: 28 mm · Ø outside: 87 mm
EUR 23.60
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Ø inside: 17.8 mm · Mounting type: Stud bolt · Ø External connection: 20 mm · Total length: 65 mm · Hole spacing inlet: 32 mm · Total height: 55 mm · Number of fixing points: 2 pcs · Height flange center hole: 45 mm · Camouflaged: No
EUR 88.90
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 45 mm · Ø External connection: 23 mm · Ø inside: 17 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Total height: 73 mm · Height flange center hole: 61 mm · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 59.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
