Simple, chrome-plated side mirror for the left or right side, suitable for your moped, moped or small motorcycle.
The mirror is pushed onto the handlebars and fixed in place using a 22 mm or 24 mm reducing bush (included in the scope of delivery).
Fits all handlebars with an outer diameter of 22 mm or 24 mm.
Total mirror length: 180 mm
Ø mirror surface: 100 mm
Mirror bar length: 140 mm
Note: We recommend checking the screws on the rear side again for tightness after mirror installation and, if necessary, additionally securing them with Loctite.
Details
| Color | black |
| Clamping diameter | 22 mm, 24 mm |
| Ø mirror surface | 100 mm |
| Mirror rod length | 140 mm |
| Total length | 180 mm |
Accessories & related products
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: M8x1.25 (standard thread) · Clamping diameter: 22 mm · Total length: 360 mm · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Thread size: M8
EUR 29.00
Bumm mirror round standard black
Total length: 305 mm · Manufacturer: Bumm · Material: Steel · Surface: varnished · Color: black · Thread type: M8x1.25 (standard thread) · Ø mirror surface: 102 mm · Ø mirror rod: 8 mm · Mirror rod length: 190 mm · Thread size: M8 · Clamping diameter: 22 mm
EUR 23.20
Loctite 222 Low-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Color: violet · Hazard warning: Causes serious eye irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: low strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 1200 sec · Temperature resistance (min.): -55 - 150 °C · Breakaway torque (according to material): 6 N/m · Breakaway torque (according to material): 14 N/m
EUR 25.50
EUR 2’550.00/l
Moped fans like you also bought:
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Nipple length: 10 mm · Number of components: 1 pcs
EUR 2.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.30
swiing® revival clamp brake cable | Pony / Cilo (P8343)
Thread type: M6x1 (standard thread) · Ø outside: 12 mm · Thread length: 9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 17 mm · Ø Cable bushing: 2.9 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Ø shaft: 8.5 mm · Number of components: 3 pcs
EUR 3.95
Collection only possible with online purchase and appointment.
