Cable duct made of dark gray plastic for Puch Maxi S, N and Supermaxi LG1, LG2 mopeds / mopeds.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. Throttle and clutch cables are pulled through the side openings of the cable cover.
Further cable guides in various colors can be found in the accessories section.
Details
| Material | Plastic |
| Color | gray |
| Width | 58 mm |
| Height | 22 mm |
| Total length | 320 mm |
| Number of fixing points | 2 pcs |
| Ø mounting hole | 5.3 mm |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival side protection screw set black | Puch Maxi S
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: silver · Drive: Slot · Drive: Triangular head · Surface: galvanized (blue) · Surface: raw · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.30
swiing® revival side protection screw set chrome | Puch Maxi S
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: Chrome · Color: silver · Drive: Slot · Drive: Triangular head · Surface: chrome-plated · Surface: galvanized (blue) · Total length: 48 mm · Total length: 63 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 17.60
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Color: silver · Total length: 12 mm · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Surface: blank · Width: 3.3 mm · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 2.6 mm · Ø outside: 4 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8.15
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Camouflaged: Yes · Total length: 47 mm · Ø inside: 14.5 mm · Hole spacing inlet: 38 mm · Total height: 54 mm · Height flange center hole: 43 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Area of application: Tuning
EUR 14.10
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Ø cylinder: 38 mm · Total length: 135 mm · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Standard
EUR 38.90
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Thickness: 4.5 mm · Material: Steel · Color: black · Surface: powder-coated · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Ø mounting hole: 6.7 mm · Ø inside: 94 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
EUR 23.60
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Color: black · Color: red · Ø Receptacle: 4 mm · Width: 60 mm · Height: 110 mm · Bulb holder: BA15s · Tension: 6 V · Brake light: No · Battery operated: No · Reflectors: Yes · Number of fixing points: 2 pcs · Depth: 80 mm · Mounting type: Nuts & bolts
EUR 43.20
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Number of components: 24 pcs · Drive: External hexagon · Thread type: M6x1 (standard thread) · Screw head: Hexagon · Color: silver · Shank: No · Thread length: 22 mm · Width across flats SW: 10 mm · Strength class: 8.8
EUR 9.35
Collection only possible with online purchase and appointment.
