Black anodized aluminium gearbox cover, suitable for your Puch moped / moped with E50 engine.
The gearbox cover is equipped with cooling fins to ensure optimum heat dissipation. The increased position of the oil filler hole makes it possible to fill 1.5 dl more oil, which further improves the cooling capacity.
The lid and the filler screw are included in the scope of delivery.
Note: The clutch cover fits both the standard clutch and the Tripple Clutch Racing clutch.
Other matching parts such as the complete Tripple-Clutch racing clutch can be found in the accessories section.
| Manufacturer | Made in Switzerland |
| Material | Aluminum |
| Surface | anodized |
| Color | black |
| Width | 116 mm |
| Height | 38.5 mm |
| Ø outside | 116 mm |
| Total length | 116 mm |
| Ø inside | 107 mm, 30 mm |
| Number of fixing points | 4 pcs |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Number of components: 1 pcs · Thickness: 0.35 mm · Puch OEM number: 349.1.10.349.1
EUR 2.85
Moped fans also bought
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Material: Steel · Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Surface: galvanized (blue) · Cable length: 1600 mm · Area of application: Standard
EUR 2.85
Oil seal NBR 17/40/7 A DUO | Puch E50
Temperature resistance (min.): -30 - 100 °C · Material: NBR · Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Manufacturer: Puch · Ø outside: 40 mm · Surface: rubberized · Width: 7 mm · Area of application: Standard
EUR 6.10
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Material: Steel · Color: gray · Manufacturer: ESJOT · Surface: blank / oiled · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22.60
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Number of components: 1 pcs · Thickness: 0.35 mm · Puch OEM number: 349.1.10.349.1
EUR 2.85
swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
Manufacturer: swiing® ingenious parts · Area of application: High End · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 44 mm · Connecting rod length center-center: 90 mm · Weight: 970 g · Number of gears: 1 pcs · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread length: 11 mm · Thread length: 15 mm · Thread type: MF10x1 (fine pitch thread) · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm
EUR 274.60
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: MVT Allumage · Color: black-matt · Total length: 170 mm · Width: 150 mm · Number of fixing points: 2 pcs · Ø outside: 130 mm · Hole spacing: 138 mm · Height: 82 mm
EUR 179.10
Not in stock
Collection only possible with online purchase and appointment.
