Racing clutch for first gear, compatible with your Tomos moped equipped with an A35 or A55 engine.
Special aramid linings are mounted on steel backing plates. Compared to aluminum backing plates, steel backing plates provide better support and are therefore less prone to deformation, chipping, or delamination at the edges—especially during hard starts and high-performance setups.
The package includes three different spring strengths for the respective application.
Note: Secure the M6 countersunk screws of the racing clutch with Loctite after you’ve selected the clutch springs that match your engine. The tightening torque is 6 Nm.
A quality product from the American manufacturer Jammer Clutches.
| Manufacturer | Jammer |
| Material | Steel |
| Surface | burnished |
| Material addition | Composite materials |
| Number of springs | 3 pcs |
| Ø inside | 12.2 mm |
| Recording type | Interlocking |
| Ø outside | 84 mm |
| Number of jaws | 3 pcs |
| Thickness | 14 mm, 26.6 mm |
| Area of application | Racing |
| Alternative version of the Tomos OEM no. | 227849 |
| Tomos | A35 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Area of application: Chemistry · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Color: blue · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Area of application: Tuning · Material: Spring steel · Surface: varnished · Color: red · Color: white · Color: yellow · Total length: 32.6 mm
EUR 35.50
Clutch Carbon 1st gear | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: Made in Europe · Area of application: Racing · Area of application: Tuning · Material addition: Carbon · Ø outside: 85 mm · Recording type: Interlocking · Thickness: 15 mm · Number of jaws: 3 pcs · Number of springs: 1 pcs · Tomos OEM number: 227849
EUR 189.70
Clutch Carbon 2nd gear | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: Made in Europe · Area of application: Racing · Area of application: Tuning · Material addition: Carbon · Ø inside: 28.5 mm · Ø outside: 85 mm · Recording type: Interlocking · Thickness: 15 mm · Number of jaws: 3 pcs · Number of springs: 1 pcs · Tomos OEM number: 227849
EUR 201.60
Explore categories from Clutch
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Chain type: 415H · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Color: gray · Rolling circumference: 1626 mm · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14.80
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Nominal diameter (thread): 6 mm · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Thread length: 12 mm
EUR 2.15
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Area of application: Chemistry · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Color: blue · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
Polini jet set (100 - 118) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Drive: External hexagon · Carburetor type: CP · Nozzle type: Main nozzle · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 114 · Nozzle size: 116 · Nozzle size: 118
EUR 47.30
Polini intake rubber Ø 28.5 / 25 mm (PHBG, Polini CP)
Manufacturer: Polini · Material: Rubber · Ø inside: 28.5 mm · Ø outside: 38.5 mm · Ø inside 2: 25 mm · Clamping diameter: 26.5 mm · Ø External connection: 37 mm · Color: black · Ø Connection 2 external: 37 mm · Ø Passage: 25 mm · Total length: 37.5 mm
EUR 17.70
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
