15 mm PHBG racing carburetor for universal use for your moped, moped and small motorcycle.
This high-quality racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 70 cc.
The tuning carburetor has a manually operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and secondary lines and the mixture adjustment screw.
The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.
Main thread size (M5): 70 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 60
Air filter connection diameter: 32 mm (M32 x 1.25)
Inlet connection diameter: 24 mm (or 26 mm after removing the reducer). 26 mm after removing the reducing sleeve)
Total height: 125 mm
Total width: 75 mm
Matching nozzles, air filters and intake manifolds can be found in the accessories section.
Quality product from the Italian manufacturer Dell'Orto.
| Manufacturer | Dell'Orto |
| Component group Carburetor | Carburetor complete |
| Carburetor type | PHBG AS |
| Nominal diameter | 15 mm |
| Width | 75 mm |
| Ø Internal connection | 24 mm |
| Ø without reducing sleeve | 26 mm |
| Ø Air filter connection | 32 mm |
| Area of application | Tuning |
| Air filter connection thread | MF32x1.25 (fine pitch thread) |
| Ø fuel hose connection | 6 mm |
| Choke control | Hand choke |
| Choke nozzle size | 60 |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 70 |
| Size of secondary nozzle | 50 |
| Mounting type | Plug connection clamped |
| Height | 125 mm |
Accessories & related products
GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
Manufacturer: GPO · Material: Aluminum · Surface: polished · Color: Chrome · Mounting type: Screws · Ø inside: 18.8 mm · Ø External connection: 23.9 mm · Hole spacing inlet: 38 mm · Total height: 57 mm · Height flange center hole: 45 mm · Total length: 40 mm · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Tuning
EUR 21.20
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Material: Brass · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
EUR 24.80
Not in stock
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
EUR 24.80
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Total length: 8 mm · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100
EUR 24.80
swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120
EUR 4.15
66HEROES Air filter mushroom grille black Dell'Orto PHBG (Ø=28 mm)
Color: black · Total length: 70 mm · Ø outside: 60 mm · Manufacturer: 66HEROES · Camouflaged: No · Filter type: Grille · Ø Internal connection: 28 mm · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 22.40
EUR 20.10
66HEROES Mushroom air filter grille 28 - 32 mm black
Manufacturer: 66HEROES · Material: Metal · Material: Rubber · Color: black · Filter type: Grille · Ø outside: 60 mm · Total length: 114 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Mounting type: Plug connection clamped · Camouflaged: No · Area of application: Tuning
EUR 18.90
Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
Material: Brass · Manufacturer: Dell'Orto · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Drive: Slot · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70
EUR 5.80
Moped fans also bought
Magura lever screw M5x18 mm
Material: Steel · Color: silver · Total length: 21.5 mm · Manufacturer: Magura · Thread length: 8.5 mm · Surface: galvanized (blue) · Shank length: 9 mm · Ø shaft: 5.9 mm · Ø External head: 8.8 mm · Thread type: M5x0.8 (standard thread) · Drive: External hexagon · Drive: Slot · Width across flats: 8 mm
EUR 3.45
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Material: Brass · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
EUR 24.80
Not in stock
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 40 mm · Stock number: BO15 · Width: 10 mm · Ball bearing closed: No · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.50
swiing® revival engine seal | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1884)
Total length: 233 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 87 mm · Thickness: 0.4 mm · Width: 140 mm · Number of fixing points: 9 pcs · Pony OEM number: A1884 · Sachs OEM no.: 0250 149 100
EUR 6.40
swiing® revival cylinder base gasket | Sachs 503 AB / AC / ADV
Nominal diameter: 38 mm · Material: Sealing paper · Thickness: 0.4 mm · Manufacturer: swiing® revival parts · Place of use: Cylinder base · Ø inside: 56 mm · Area of application: Standard · Hole pattern [mm]: 55 x 55
EUR 5.20
Not in stock
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Place of use: Crankshaft · Width: 5.5 mm · Ø outside: 30 mm · Ø inside: 15 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A5602 · Sachs OEM no.: 0230 111 100
EUR 9.40
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
