Disc brake system suitable for the rear 5-star cast rim of your Puch moped / moped.
The brake disk mount is compatible with both original Grimeca rims and their replicas. For installation, the rear wheel rim is placed between the adapter piece for the brake disk and the wheel hub and clamped using the enclosed screws in a sandwich principle.
The disc brake system is supplied ready for installation with the following components:
| Ø Handlebars | 22 mm |
| Ø outside | 185 mm |
| Cable length | 1750 mm |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.10
EUR 2’610.00/l
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Manufacturer: Magura · Ø Cable bushing: 2.3 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Bundle: 6 mm · Total length: 15 mm · Width across flats: 7 mm · Ø outside: 8 mm · Thread type: M6x1 (standard thread) · Thread length: 7 mm · Area of application: Standard
EUR 3.00
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Total length: 28 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Number of components: 3 pcs · Area of application: Tuning
EUR 21.30
Oil filler plug with sealing ring | Puch E50
Drive: Slot · Screw head: Lens head · Material: Steel · Surface: galvanized (blue) · Total length: 14.6 mm · Ø External head: 14 mm · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.15
GPO sprocket 35 - 57 teeth black | Puch Maxi S, N / X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 94 mm · Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Number of teeth: 35 pcs · Number of teeth: 36 pcs · Number of teeth: 37 pcs · Number of teeth: 38 pcs · Number of teeth: 39 pcs · Number of teeth: 40 pcs · Number of teeth: 41 pcs · Number of teeth: 42 pcs · Number of teeth: 43 pcs · Number of teeth: 44 pcs · Number of teeth: 45 pcs · Number of teeth: 46 pcs · Number of teeth: 47 pcs · Number of teeth: 48 pcs · Number of teeth: 49 pcs · Number of teeth: 50 pcs · Number of teeth: 51 pcs · Number of teeth: 52 pcs · Number of teeth: 53 pcs · Number of teeth: 54 pcs · Number of teeth: 55 pcs · Number of teeth: 56 pcs · Number of teeth: 57 pcs · Ø bolt circle: 106 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm
EUR 23.70
Collection only possible with online purchase and appointment.
