Black, adjustable shock absorbers for your moped, scooter, and small motorcycle.
The stiffness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mounting point to mounting point): 260 mm
; Outer diameter of coil spring: 44 mm
; Shaft diameter: 28 mm
; Sleeve diameter for mounting: 10 mm
The rear springs should always be secured with large U-washers to prevent the plastic bushings from shifting when lateral forces are applied.
The package includes one pair.
Rear springs from other manufacturers, the matching adjustment wrench, as well as the washers and mounting hardware can be found in the accessories section.
Brand-name product from the manufacturer DMP.
| Manufacturer | DMP |
| Ø outside | 44 mm |
| Total length | 290 mm |
| Color | black |
| Material | Steel |
| Surface | varnished |
| Damping type | Spring |
| Ø spars | 28 mm |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm |
| Mounting type | Nuts & bolts |
| Hole spacing | 260 mm |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 8 mm · Screw head: Hexagon · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.10
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm
EUR 21.20
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Total length: 295 mm · Mounting type: Nuts & bolts · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Hole spacing: 260 mm
EUR 59.20
YSS Shock absorber Racing 28 cm (oil pressure)
Manufacturer: YSS · Surface: varnished · Damping type: Hydraulic (oil) · Total length: 310 mm · Color: black · Ø spars: 280 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Hole spacing: 280 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 154.10
Explore categories from Shock absorber & swingarm
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø outside: 8 mm · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Width across flats: 7 mm · Thread length: 7 mm
EUR 2.95
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Thread type: M6x1 (standard thread) · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 12 mm
EUR 2.15
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.80
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.35
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Total length: 47 mm · Total length: 60 mm · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm
EUR 15.30
Working late? Evening hours on Thursday until 20:00
