Cost-effective racing exhaust suitable for your Puch Maxi S / N, Puch X30 Sport NS / NL, as well as Puch X30 NG-2AH moped / moped with straight outlet.
The Bullit exhaust system provides a good performance increase for souped-up original cylinders and smaller racing cylinders.
The muffler impresses with its good workmanship. Thanks to the silver silencer and the bare steel muffler, which has been coated with clear lacquer, the resonance exhaust looks really sporty and is an absolute eye-catcher.
Ø flame tube: 28 mm
Material: steel
Surface: painted (colorless)
Further exhaust-specific material can be found in the accessories section.
A quality product made in Portugal.
| Number of fixing points | 3 pcs |
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | varnished |
| Mounting type | Welded lug |
| Flame tube attachment | Flange |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Accessories & related products
Exhaust Bullet 28 mm chrome | Puch Maxi, X30
Manufacturer: Made in Portugal · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: silver · Ø outside: 75 mm · Total length: 865 mm · Ø Silencer: 60 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 3 pcs · Flame tube attachment: Flange
EUR 65.20
HOMOET exhaust "P6 Special" (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø outside: 88 mm · Total length: 935 mm · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 349.90
Hot 
swiing® ingenious gasket outlet 28 mm graphite
Place of use: Exhaust · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Ø inside: 27.4 mm · Area of application: Tuning
EUR 8.80
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Ø Internal connection: 28 mm · Total length: 730 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Flame tube attachment: Flange
EUR 142.30
Explore categories from Exhaust system
Moped fans also bought
Hot
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Camouflaged: No · Color: Chrome · Color: black · Material: Metal · Material: Rubber · Filter type: Grille · Total length: 113 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Ø outside: 61 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 15.30
Airsal gasket set 44 - 45 mm | Puch
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 11.80
Hot
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Camouflaged: Yes · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Tuning
EUR 50.90
Hot
swiing® ingenious gasket outlet 28 mm graphite
Place of use: Exhaust · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Ø inside: 27.4 mm · Area of application: Tuning
EUR 8.80
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Width: 47 mm · Ø Inside entrance: 17 mm · Total length: 65 mm · Height: 89 mm · Height: 109 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 142.30
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Total length: 38 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Ø inside: 17 mm · Total height: 53.5 mm · Height flange center hole: 42 mm · Hole spacing inlet: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 53.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
