Chromed 28 mm cigar exhaust with 70 mm outer diameter, which can be fitted to your Puch Maxi S/N, Puch X30 Sport NS/NL and Puch X30 NG-2A moped / moped after a small adjustment.
Flame pipe and silencer are separate and are supplied as shown without clamp.
Notes: A 70 mm clamp (item no. 11543 or 18313) must be used for fitting the Puch Maxi N.
For Puch X30 NG-2A, the spanner must be bent slightly so that it does not protrude from the rear case.
The M6 screw at the end of the pot must be checked and locked with an additional nut, otherwise the nut may loosen and the silencer insert may fall out.
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø outside | 70 mm |
| Total length | 920 mm |
| Mounting type | Welded lug, Stud bolts & nuts |
| Ø Flame tube outside | 28 mm |
| Number of fixing points | 1 pcs |
| Ø Internal connection | 28 mm |
| Exhaust type | Cigar |
| Flame tube attachment | Flange |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Moped fans also bought
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18.80
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: Yes
EUR 50.70
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Choke control: Hand choke · Total length: 66 mm · Width: 50 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 94.40
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Aluminum · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Ø inside: 15 mm · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Camouflaged: Yes
EUR 41.30
Collection only possible with online purchase and appointment.
