Side exhaust tailpipe with a diameter of 65 mm suitable for various exhaust pipes on mopeds, mopeds or small motorcycles.
The tailpipe is perfectly modeled on the original. The end piece is flattened at the side.
This protects the rims and tires from dirt, as the exhaust gas flows off to the side, and also gives the muffler a nostalgic touch.
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Total length | 155 mm |
| Ø outside | 65 mm |
| Ø External connection | 62.5 mm |
| Universal | |
| Puch | |
| Sachs | |
| Hercules |
Accessories & related products
Moped fans also bought
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 33 mm · Place of use: Crankshaft · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C
EUR 10.60
NSK 6201 ball bearing 12/32/10
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6201 · Ø inside: 12 mm · Ø outside: 32 mm · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Steel · Surface: blank · Area of application: Standard · Bearing type: Shoulder bearing · Width: 10 mm · Ball bearing closed: No
EUR 10.10
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Ø inside: 14.96 mm · Ø outside: 31.5 mm · Place of use: Pinion shaft · Manufacturer: Sachs · Material: NBR · Surface: coated · Area of application: Standard · Width: 3.5 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8.90
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø inside: 15 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.40
swiing® revival 80° carburetor pipe bend M6x0.75
Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Angle: 80 ° · Height: 35 mm · Internal thread: MF5x0.75 (fine pitch thread)
EUR 8.20
Handlebar stem 22 mm front black (4-point adjustment for fork plate handlebars)
Drive: External hexagon · Total length: 170 mm · Material: Aluminum · Material: Steel · Surface: powder-coated · Color: black · Width: 50 mm · Clamping diameter: 22 mm · Number of fixing points: 4 pcs · Ø Stem: 22 mm
EUR 35.50
Collection only possible with online purchase and appointment.
