44 mm diameter racing cylinder kit, compatible with Tomos Sprint, Quadro, FunSport, and Classic mopeds equipped with an A35 engine.
This reliable everyday cylinder impresses with its suitability for daily use, though it doesn’t compete at the top level.
To get the full performance out of the 65 cc tuned cylinder, we recommend installing a racing exhaust and a matching carburetor.
The package includes the gray cast iron cylinder and the complete piston. The gaskets for the racing cylinder are not included.
Note: We recommend that you check the edges inside the cylinder and lightly deburr them if necessary, as they may occasionally be slightly sharp. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find alternative racing cylinders and the matching gasket set in the accessories section.
Brand-name product from the manufacturer FAST ARROW.
| Manufacturer | FAST ARROW |
| Material | Gray cast iron |
| Surface | varnished |
| Displacement | 65 ccm |
| Ø cylinder neck | 47.9 mm |
| Nominal diameter | 44 mm |
| Ø outlet inside | 22.6 mm |
| Inlet window | 36.5 x 29.5 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Hole spacing outlet | 42 mm |
| Number of fixing points | 4 pcs |
| Outlet type | slanted |
| Hole pattern [mm] | 44 x 44 |
| Thread outlet | M6x1 (standard thread) |
| Hole spacing inlet | 39 mm, 32 mm |
| Area of application | Tuning |
| Tomos | Classic Quadro Sprint Fun Sport'R Roadie A35 |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Total length: 30 mm
EUR 2.15
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Width: 70 mm · Carburetor type: SHA · Height: 100 mm · Nominal diameter: 15 mm · Total length: 82 mm · Nozzle thread: M5x0.8 (standard thread) · Ø without reducing sleeve: 21 mm · Nozzle size: 68 · Area of application: Racing · Area of application: Tuning · Ø Inside entrance: 15 mm · Ø Internal connection: 18 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke
EUR 82.90
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Ø cylinder: 45 mm · Number of components: 5 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Decompressor: Yes · Area of application: Tuning
EUR 11.80
Not in stock
swiing® revival nozzle set M5 (60 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Total length: 8 mm
EUR 27.20
Not in stock
swiing® revival nozzle set M5 (70 - 80) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Total length: 8 mm
EUR 27.20
Explore categories from Cylinder
Moped fans also bought
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Total length: 30 mm
EUR 2.15
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Ø cylinder: 45 mm · Number of components: 5 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Decompressor: Yes · Area of application: Tuning
EUR 11.80
Not in stock
Working late? Evening hours on Thursday until 20:00
