Fan-cooled 38 mm cylinder kit with a 10 mm piston pin. This reproduction cylinder has a larger intake than the original cylinder.
Compatible with Puch X30 Velux and Puch X30 NG-2AH mopeds.
Note: For Velux engines, the small slot at the sealing surface must be filled with casting material to ensure the cylinder kit is airtight.
We recommend using Wekem 2K liquid metal, which can be found in the accessories section.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Ø piston pin (B): 10 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Weight piston kit: 73 g
Camouflaged: No · Manufacturer: GPO · Material: Gray cast iron · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Hole spacing inlet: 32 mm · Hole spacing for cylinder mounting: 44 mm · Outlet type: straight · Number of fixing points: 4 pcs · Area of application: Tuning, Racing
| Puch | Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 106 mm · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
EUR 2.15
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Material: Aluminum · Area of application: Standard · Ø outside: 90 mm · Ø cylinder: 38 mm · Height: 35 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Ø screw holder: 6.4 mm · Decompressor: No
EUR 47.30
Not in stock
WEKEM 2K Liquid Metal 24 ml
Temperature resistance (min.): -20 - 80 °C · Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents: 24 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: gray · Area of application: Chemistry · Type of application: 2K · Alignment time: 240 sec
EUR 23.60
EUR 472.00/kg
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Area of application: Standard · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 10.60
Piston 38 mm (10 mm KoBo) short shirt | Puch fan-cooled
Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 10 mm · Piston ring height: 2 mm · Weight piston kit: 73 g
EUR 47.30
Explore categories from Cylinder
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) plastic connection
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: vertical / vertical · Outlet direction: any · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
EUR 32.60
Oil seal NBR 17/28/7 AS Pinion shaft | Puch Z50
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Place of use: Pinion shaft · Manufacturer: Puch · Material: NBR · Ø inside: 17 mm · Ø outside: 28 mm · Width: 7 mm
EUR 5.80
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Place of use: Crankshaft · Manufacturer: Puch · Material: NBR · Width: 7 mm · Ø outside: 35 mm · Ø inside: 17 mm
EUR 9.40
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Area of application: Standard · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 10.60
Piston 38 mm (10 mm KoBo) short shirt | Puch fan-cooled
Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 10 mm · Piston ring height: 2 mm · Weight piston kit: 73 g
EUR 47.30
GPO cylinder 38 mm fan-cooled | Puch X30 Velux / NG-2AH
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Camouflaged: No · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing for cylinder mounting: 44 mm · Outlet type: straight
EUR 77.00
Working late? Evening hours on Thursday until 20:00
