Hot 
The legend is back! The legendary 43.5 mm Metrakit racing cylinder from days gone by has risen like a phoenix from the ashes and ignites a new fire in your Puch Maxi S, N, X30 Sport NS, NL and Supermaxi LG1 and LG2 moped / moped.
The aluminium cylinder with grey cast iron liner is an optimized replica of the original Metrakit racing cylinder. The timing has been revised compared to the original and provided with more advance, making the well-known piston sticking problem due to high heat development a thing of the past. In addition, the cylinder height has been precisely adapted so that the extra-thick base gasket previously required is now superfluous.
This GPO racing cylinder is one of the strongest and most powerful in its class and has been extensively tested. It impresses with ample torque across the entire power band and offers an impressively powerful performance. Thanks to the optimizations compared to the original, the cylinder also achieves a noticeably higher engine speed, which ensures even more power and driving pleasure.
To get the full power out of this tuning cylinder, we recommend at least a 15 mm carburetor. However, you can achieve significantly more power with a 17 mm carburetor. Thanks to the generous 19 mm intake, you have sufficient scope for optimum power delivery.
Manufacturer: GPO · Nominal diameter: 43.5 mm · Material: Aluminum · Ø outside piston (A): 43.46 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.1 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring, L-ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.55 mm, 2 mm · Thick piston ring: 1.9 mm, 1.8 mm · Weight piston kit: 87 g
Manufacturer: GPO · Material: Sealing carton, Aluminum, Graphite / Graphite · Number of components: 4 pcs · Thickness: 0.4 mm, 0.5 mm, 2.6 mm · Ø cylinder: 43.5 mm, 45 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 X 44
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9 · Nominal diameter (thread): 6 mm
| Nominal diameter | 43.5 mm |
| Manufacturer | GPO |
| Material | Aluminum, Gray cast iron |
| Surface | varnished |
| Displacement | 64 ccm |
| Area of application | Tuning, Racing |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 47.8 mm |
| Ø outlet inside | 26 mm |
| Ø Inlet inside | 19 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 4 pcs |
| Ø piston pin (B) | 12 mm |
| Hole pattern [mm] | 44 x 44 |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Camouflaged | No |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch E50
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Area of application: Tuning · Choke control: Hand choke · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Hole spacing inlet: 38 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 124.50
Hot
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Manufacturer: swiing® ingenious parts · Weight: 968 g · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Area of application: High End · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread length: 11 mm · Ø Connecting rod eye: 15 mm · Thread length: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
EUR 213.50
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 730 mm · Mounting type: Screwed clamp · Ø outside: 70 mm · Exhaust type: Cigar · Ø Internal connection: 28 mm · Flame tube attachment: Flange
EUR 142.30
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø inside: 17 mm · Total length: 38 mm · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53.5 mm · Height flange center hole: 42 mm · Camouflaged: Yes
EUR 53.30
HOMOET Exhaust "RS Cigar" 28 mm Black | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: powder-coated · Color: black · Total length: 920 mm · Mounting type: Welded lug · Number of fixing points: 3 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Ø Internal connection: 24.5 mm · Flame tube attachment: Nuts & bolts
EUR 183.80
swiing® ingenious 17 mm carburetor set camouflaged | Puch E50
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Choke control: Hand choke · Carburetor type: SRF · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Nozzle size: 74 · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 213.50
swiing® ingenious resonance exhaust set Ø 28 / 70 mm camouflaged | Puch Maxi
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 70 mm · Ø Internal connection: 28 mm · Ø outside: 70 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Total length: 730 mm · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 183.80
GPO piston rings 43.5 mm (Metrakit replica) | Puch
Manufacturer: GPO · Nominal diameter: 43.5 mm · Thick piston ring: 1.7 mm · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Height: 1.5 mm
EUR 15.30
GPO 45 mm cylinder kit (Metrakit replica) | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Area of application: Racing · Area of application: Tuning · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread)
EUR 189.70
Hot
GPO 21 mm intake manifold Dell'Orto PHBG | Puch E50 / Z50 / ZA50 (wind cooled) / ZA50 (Cat.)
Manufacturer: GPO · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Ø inside: 21 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Total length: 85.5 mm · Total height: 68.6 mm · Mounting type: Stud bolts & nuts · Ø External connection: 26 mm
EUR 40.90
Explore categories from Cylinder
Moped fans also bought
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
EUR 2.15
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Total length: 106 mm · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
GPO 44 mm Cylinder Head Tuning, Black | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Surface: varnished · Ø cylinder: 44 mm · Width: 125 mm · Number of fixing points: 4 pcs · Candle thread: short · Height: 55 mm · Total length: 135 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 50.90
GPO 43.5 mm piston (Metrakit replica) | Puch
Nominal diameter: 43.5 mm · Manufacturer: GPO · Material: Aluminum · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Ø outside piston (A): 43.46 mm · Compression height (C): 22.9 mm · Curvature (D): 3.1 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring impact: Internal fuse (IS) · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Ø piston pin (B): 12 mm · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Weight piston kit: 87 g
EUR 59.20
GPO 45 mm piston (Metrakit replica) | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Ø outside piston (A): 44.93 mm · Compression height (C): 23.25 mm · Curvature (D): 2.85 mm · Total piston height (E): 49.6 mm · Number of piston rings (F): 2 pcs · Piston ring impact: Internal fuse (IS) · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Ø piston pin (B): 12 mm · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Weight piston kit: 98 g
EUR 59.20
GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Ø outlet inside: 26.5 mm · Hole spacing inlet: 38 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 X 44 · Hole spacing outlet: 42 mm
EUR 17.70
GPO 45 mm cylinder kit (Metrakit replica) | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Area of application: Racing · Area of application: Tuning · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread)
EUR 189.70
Working late? Evening hours on Thursday until 20:00
