Racing kit with 44 mm diameter for your Tomos moped / moped with A35 engine.
This 65 cc racing cylinder made of aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) impresses with its good workmanship and long service life.
In order to get the full power out of the tuning cylinder, a racing exhaust and a carburetor with plenty of oomph should be fitted.
All necessary gaskets, piston pins, piston rings and circlips are included in the scope of delivery.
Note: Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Nominal diameter | 44 mm |
| Manufacturer | GPO |
| Material | Aluminum |
| Displacement | 65 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 47.8 mm |
| Hole spacing inlet | 36 mm, 39 mm |
| Surface | sandblasted |
| Ø outlet inside | 22.8 mm |
| Inlet window | 35.5 x 29.5 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Area of application | Tuning |
| Hole pattern [mm] | 44 x 44 |
| Ø piston pin (B) | 12 mm |
| Number of fixing points | 4 pcs |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | No |
| Camouflaged | No |
| Tomos |
Accessories & related products
GPO Piston 44 mm 12 mm KoBo | Puch & Tomos A3/A35
Manufacturer: GPO · Ø outside piston (A): 43.96 mm · Compression height (C): 21.9 mm · Curvature (D): 4.15 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm
EUR 45.00
Explore categories from Cylinder
Moped fans also bought
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Total length: 30 mm · Diameter: 5.95 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.15
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Width: 70 mm · Height: 100 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA · Nominal diameter: 15 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 15 mm · Area of application: Racing · Area of application: Tuning · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Ø Internal connection: 18 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 68
EUR 82.90
Not in stock
DMP 44 mm cylinder head (higher compression) | Tomos
Width: 145 mm · Height: 66 mm · Manufacturer: DMP · Material: Aluminum · Surface: glass bead blasted · Number of fixing points: 4 pcs · Ø cylinder: 44 mm · Area of application: Racing · Area of application: Tuning · Candle thread: short · Total length: 145 mm · Ø screw holder: 8 mm · Hole pattern [mm]: 44 x 44
EUR 71.10
Working late? Evening hours on Thursday until 20:00
