Throttle cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing carburetors.
| Material | Brass |
| Total length | 45.5 mm, 53.5 mm |
| Height | 30 mm |
| Manufacturer | GPO |
| Width across flats nut | 8 mm |
| Component group Carburetor | Adjusting screws, float, etc. |
| Ø outside | 6 mm |
| Thread type | MF6x0.75 (fine pitch thread) |
| Internal thread | MF6x0.75 (fine pitch thread) |
| Angle | 85 ° |
| Pony OEM number | A2066 |
| Sachs OEM no. | 0261 132 000 |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
| Zündapp Belmondo |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard
EUR 3.30
Dell'Orto 90° carburetor pipe bend set M6x0.75
Material: Brass · Surface: nickel-plated · Total length: 43 mm · Total length: 52 mm · Height: 27 mm · Manufacturer: Dell'Orto · Ø outside: 6 mm · Width across flats nut: 7 mm · Component group Carburetor: Adjusting screws, float, etc. · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 90 °
EUR 14.10
Dell'Orto 50° carburetor elbow set M6x0.75
Material: Brass · Surface: nickel-plated · Total length: 36.5 mm · Total length: 42 mm · Height: 40 mm · Height: 48 mm · Manufacturer: Dell'Orto · Ø outside: 6 mm · Width across flats nut: 7 mm · Component group Carburetor: Adjusting screws, float, etc. · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 50 °
EUR 14.10
Dell'Orto 40° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Total length: 30.5 mm · Total length: 37.5 mm · Height: 57 mm · Height: 67 mm · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 40 ° · Width across flats nut: 7 mm
EUR 14.10
swiing® revival 80° carburetor pipe bend M6x0.75
Material: Brass · Surface: nickel-plated · Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Ø outside: 6 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 80 °
EUR 8.15
90° carburetor pipe bend M7x0.75
Material: Brass · Total length: 47 mm · Total length: 53.5 mm · Height: 29 mm · Ø outside: 7 mm · Width across flats nut: 8 mm · Width across flats nut: 10 mm · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: 18 Catalyst · Carburetor type: 85 · Internal thread: MF6x0.75 (fine pitch thread) · Thread type: MF7x0.75 (fine pitch thread) · Angle: 90 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 14.10
swiing® revival 90° carburetor pipe bend M6x0.75
Height: 32 mm · Manufacturer: swiing® revival parts · Total length: 40 mm · Total length: 49 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 90 °
EUR 8.15
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard
EUR 3.30
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.70
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Total length: 6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Ø outside: 5 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.35
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 5.80
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 2200 mm · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.70
Collection only possible with online purchase and appointment.
