Chrome-plated, turned attachment parts for your Puch Maxi S moped / moped.
The set consists of the following components:
- A pair of side bars
- Gear guards
- Stay for the front fender
The parts are also available individually from us. You can find other add-on parts such as turned side stands, pedals, footrests or handlebars in the corresponding categories or in the accessories section.
When you buy this complete set, you get a big discount on the retail price of the individual parts.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 315 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
| Manufacturer | GPO |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
Handlebar fork plate 35 cm turned with chrome strut
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Width: 540 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Fork plate holder length: 150 mm · Mounting type: Fork plate · Color: Chrome · Length handlebar ends: 160 mm · Crossbar: Yes · Ø inside (C): 10 mm · Total length over ends: 190 mm · Height: 350 mm
EUR 53.10
Handlebar fork plate 20 cm turned chrome
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Clamping diameter: 22 mm · Ø outside: 22 mm · Height: 200 mm · Fork plate holder length: 110 mm · Mounting type: Fork plate · Length handlebar ends: 205 mm · Crossbar: No · Width: 570 mm
EUR 41.20
Handlebar fork plate 20 cm turned with chrome strut
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Fork plate holder length: 100 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Color: Chrome · Length handlebar ends: 200 mm · Width: 580 mm · Height: 200 mm · Mounting type: Fork plate · Crossbar: Yes · Ø inside (C): 11 mm · Total length over ends: 220 mm
EUR 41.20
Handlebar fork plate 21 cm "Z" turned chrome
Manufacturer: Made in Portugal · Surface: chrome-plated · Ø outside: 22 mm · Material: Steel · Fork plate holder length: 175 mm · Color: Chrome · Width: 550 mm · Clamping diameter: 22 mm · Length handlebar ends: 205 mm · Height: 210 mm · Mounting type: Fork plate · Crossbar: No
EUR 52.60
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.70
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.35
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Nominal diameter: 15 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Width: 50 mm · Height: 95 mm · Area of application: Tuning · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 94.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 11.70
Collection only possible with online purchase and appointment.
