Three-jaw centrifugal clutch made of aluminum suitable for your Puch Maxi moped / moped with E50 engine.
.The centrifugal clutch has 3 lightweight aluminum jaws. Thanks to the lighter weight, the clutch engagement point is shifted backwards, which ensures a higher speed when starting off.
We do not recommend using the clutch for racing bikes over 50 cc.
| Manufacturer | GPO |
| Material | Steel, Aluminum |
| Material addition | Composite materials |
| Thickness | 20.9 mm |
| Recording type | Cone mounting |
| Ø inside | 12 mm, 14.6 mm |
| Number of jaws | 3 pcs |
| Ø outside | 93 mm |
| Number of springs | 3 pcs |
| Area of application | Standard, Original |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Color: blue · Area of application: Tuning · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Surface: coated
EUR 21.20
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø outside: 116 mm · Thickness: 0.35 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.85
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.20
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.9 mm · Manufacturer: swiing® ingenious parts · Color: yellow · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.20
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Manufacturer: GPO · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm
EUR 11.80
swiing® revival oil filler plug with sealing ring | Puch E50
Material: Steel · Surface: galvanized (blue) · Screw head: Lens head · Number of components: 2 pcs · Manufacturer: swiing® revival parts · Thread type: M10x1.5 (standard thread) · Total length: 14.6 mm · Thread length: 6 mm · Nominal diameter (thread): 10 mm · Ø External head: 14 mm · Drive: Slot · Puch OEM number: 364.1.10.660.1
EUR 4.65
swiing® revival Stud Bolt Set M6x106 | Puch
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Nominal diameter (thread): 6 mm · Drive: External hexagon · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Nut type: Hexagon nut 0.8D · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Height: 8 mm · Drive: External hexagon · Width across flats: 17 mm
EUR 4.65
Working late? Evening hours on Thursday until 20:00
