Black, adjustable dampers with orange coil springs for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Manufacturer | GPO |
| Surface | varnished |
| Damping type | Spring |
| Color | orange, black |
| Adjustable | Yes |
| Ø outside | 50 mm |
| Ø spars | 30 mm |
| Hole spacing | 300 mm |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Color: blue · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.20
EUR 2’620.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Material: Steel · Color: black · Number of fixing points: 2 pcs · Manufacturer: YSS · Ø outside: 52 mm · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 32 mm · Hole spacing: 330 mm
EUR 167.10
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
EUR 21.40
MKX shock absorber 30 cm chrome
Number of fixing points: 2 pcs · Manufacturer: MKX · Ø outside: 46 mm · Color: Chrome · Material: Aluminum · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Hole spacing: 300 mm · Mounting type: Nuts & bolts
EUR 59.60
Moped fans also bought
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Ø outside: 91 mm · Total length: 187 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm · Brake lever length (lever length): 55 mm
EUR 83.50
swiing® revival chain tensioner Simplex | Sachs 503 / Pony GTX, Cross
Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: swiing® revival parts · Total length: 120 mm · Color: black · Color: silver · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Ø outside chain roller: 40 mm · Ø inside chain roller (chain run): 29 mm · Roll width outside: 19 mm · Roller width inside (max. chain width): 10 mm
EUR 51.30
Collection only possible with online purchase and appointment.
