Grip set made from a soft, gray rubber compound.
The Piaggio logo is embedded on both grips.
The grip set consists of two grips with an inner diameter of 22 mm. It therefore requires some effort to get the grip over the throttle grip.
However, the material is quite soft and stretchy.
Length of the grip pull (measured from the inside): 13.4 cm
A quality product made in Italy.
Details
| Manufacturer | Made in Italy |
| Material | Rubber |
| Total length | 134 mm |
| Color | gray, white |
| Ø inside | 22 mm |
Suitable for the following models
| Universal | |
| Piaggio |
Moped fans like you also bought:
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Color: gray · Ø Pin: 3.94 mm
EUR 13.30
EUR 14.80
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Number of components: 1 pcs · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.30
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Number of components: 1 pcs · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 2.85
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11.70
EUR 26.00/l
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: MF6x0.75 (fine pitch thread) · Height: 30 mm · Ø outside: 6 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.00
Handlebar fork plate 35 cm curved with chrome strut
Clamping diameter: 22 mm · Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Fork plate holder length: 90 mm · Width: 720 mm · Color: Chrome · Length handlebar ends: 150 mm · Height: 350 mm · Crossbar: Yes · Ø outside: 22 mm · Mounting type: Fork plate
EUR 39.70
Collection only possible with online purchase and appointment.
