22 mm reproduction exhaust suitable for Puch Maxi S & N, Puch X30 Sport NS / NL and Supermaxi LG1 / LG2 mopeds / mopeds (if Puch Maxi cylinder is mounted).
The exhaust is a 2-piece, bolted, with corresponding Puch number and stamped logo.
The M7 bolt at the end of the flame tube must be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
We also recommend replacing the mounted gasket between the flame tube and the muffler. You can find a high-quality replacement product in the accessories section.
Attention: The sound of the replica exhausts can be slightly louder than the originals. This can be remedied by wrapping insulation wool around the muffler. You can find this among the accessories.
Original Puch spare part number: 349.1.16.000.2
Branded product from the Portuguese manufacturer Jamarcol.
| Manufacturer | Jamarcol |
| Material | Steel |
| Color | Chrome |
| Surface | chrome-plated |
| Total length | 920 mm |
| Ø outside | 59 mm |
| Ø Flame tube outside | 22 mm |
| Exhaust type | Flute |
| Mounting type | Welded lug, Stud bolts & nuts |
| Number of fixing points | 4 pcs |
| Flame tube attachment | Flange |
| Puch | E50 |
Ratings
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (colloquially known as stainless steel) · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nut type: Self-securing nut · Drive: External hexagon
EUR 0.85
Explore categories from Exhaust system
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 11.80
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 11.80
swiing® ingenious 38 mm cylinder kit CH12 "Tuning" camouflaged | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Hole spacing inlet: 38 mm · Inlet window: 23 / 20 x 14 · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Decompressor: Yes · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 142.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
