High-quality full cheek crankshaft for Morini M0, M01 and M1 engines which is installed on Alpa Turbo / Chopper and Malaguti Fifty mopeds, among others.
The connecting rod is highly polished. In addition, the rear connecting rod bearing is a silver bearing, which has excellent emergency running properties. The balancing bores of the racing crankshaft are sealed with aluminum inserts for greater pre-compression.
Note: The crankshaft does not fit FMT1 CH engines.
Corresponding bearings, oil seals, racing cylinders etc. can be found in the accessories section.
Branded product from the Portuguese manufacturer Jasil under the Top Racing brand.
| Manufacturer | Jasil |
| Area of application | Racing |
| Cheek type | Full cheeks |
| Crankshaft stroke | 39 mm |
| Total length of crankpin on clutch side | 71 mm |
| Total length crankpin ignition side | 67.25 mm |
| Ø piston pin (B) | 12 mm |
| Ø Bearing seat (clutch side) | 17 mm |
| Ø Bearing seat (ignition side) | 17 mm |
| Alpa Chopper / Turbo | |
| Malaguti |
Accessories & related products
Airsal 43.5 mm cylinder kit 12 mm KoBo | Morini
Material: Aluminum · Surface: sandblasted · Nominal diameter: 43.5 mm · Manufacturer: Airsal · Number of fixing points: 4 pcs · Camouflaged: No · Ø cylinder neck: 47.9 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Ø outlet inside: 23.2 mm · Hole spacing outlet: 35 mm · Outlet type: straight · Thread outlet: M5x0.8 (standard thread) · Hole pattern [mm]: 46 x 46 · Decompressor: No
EUR 118.10
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm · Width across flats SW: 7 mm
EUR 2.95
Magura adjusting screw brake long
Ø External head: 9.1 mm · Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Color: silver · Ø shaft: 6 mm · Drive: Knurled screw · Total length: 47 mm · Total length: 65 mm · Thread length: 24 mm · Shank length: 11 mm
EUR 4.60
NTN 6203 C3 Ball bearing 17/40/12
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6203 · Width: 12 mm · Inner ring width: 12 mm · Manufacturer: NTN · Bearing clearance: C3 · Groove ring: No · Material: Steel · Surface: blank · Ø inside: 17 mm · Ø outside: 40 mm · Area of application: Standard · Ball bearing closed: No
EUR 10.50
Oil level screw engine | Zündapp Bergsteiger / Alpa Chopper / Malaguti Fifty
Material: Steel · Surface: galvanized (blue) · Drive: Slot · Color: silver · Manufacturer: ALPA · Number of components: 1 pcs · Screw head: Cylinder head · Area of application: Standard · Thread type: M6x1 (standard thread) · Thread length: 16 mm
EUR 2.85
Collection only possible with online purchase and appointment.
