1/2" x 1/4" chain with 144 links to drive your moped, small motorcycle and motorcycle.
This roller chain is used on vehicles such as the Kreidler Florett, Zündapp KS, etc.
The chain can also withstand somewhat higher loads. The chain lock with spring lock, also known as a clip lock, is included in the scope of delivery.
Pitch: 1/2x1/4 420 (wider than standard moped chains)
Finish: H (heavy-duty finish with reinforced plates and enlarged link surfaces)
Length: 144 links
Since the drive chain must be shortened in any case, we recommend that you also order a chain breaker, as listed under accessories.
Branded product from the manufacturer KMC.
| Chain type | 420H |
| Chain pitch | 1/2" x 1/4" |
| Manufacturer | KMC |
| Material | Steel |
| Surface | raw |
| Rolling circumference | 1829 mm |
| Number of chain links | 144 pcs |
| Chain lock type | Spring lock |
| Universal |
| Sachs |
| Kreidler |
Ratings
Accessories & related products
KMC drive chain silver nickel-plated small motorcycle 420H (reinforced) 144L
Chain pitch: 1/2" x 1/4" · Chain type: 420H · Manufacturer: KMC · Material: Steel · Surface: nickel-plated · Number of chain links: 144 pcs · Rolling circumference: 1829 mm · Chain lock type: Spring lock · Color: silver
EUR 34.20
Moped fans also bought
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.40
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Height: 95 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 76.90
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Area of application: Tuning · Total length: 47 mm · Ø inside: 14.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 54 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Mounting type: Screws · Camouflaged: Yes
EUR 14.10
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Surface: blank · Ø outside: 40 mm · Ø inside: 15 mm · Ball bearing closed: No · Width: 10 mm · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.50
GPO sprocket 9 - 21 teeth wide | Puch
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Recording type: Interlocking · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
EUR 9.35
Collection only possible with online purchase and appointment.
