«X Special Belt» drive belt with 30° angle for your Piaggio Ciao moped / moped with Vario drive and installed over-range kit from Malossi.
This drive belt is used as standard in conjunction with the 107 mm converter pulleys.
Note: Due to its dimensions, this timing belt is not suitable for use with standard variomatic drives with 13 mm wide belts.
For Piaggio Ciao models, the frame must be adapted so that the overrange kit can be installed.
Alternative belts, the complete overrange kit and other add-on parts can be found in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Outer width | 15.5 mm |
| Rolling circumference | 970 mm |
| Belt profile | toothed / serrated |
| Gearbox type | Vario |
| Height | 8.5 mm |
| Piaggio | Ciao - P , SC , PX , C24 |
Ratings
Accessories & related products
Explore categories from Variomatic belt drive
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Strength class: 8.8
EUR 11.40
M10 sealing ring Fiber
Place of use: Carburetor · Material: Fiber · Place of use: Motor housing · Surface: raw · Ø outside: 13.8 mm · Ø inside: 10 mm · Thickness: 1.6 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
EUR 1.85
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Area of application: Original · Area of application: Standard · Color: black · Ø cable holder: 5.9 mm · Ø mounting hole: 4.6 mm · Height: 17 mm · Total length: 76.5 mm · Mounting type: Screws · Hole spacing: 54 mm · Number of fixing points: 2 pcs · Ø Internal flywheel: 90 mm · Place of use: Internal (in the ignition) · Cable length: 37 mm · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 74.80
Oil seal 13/22/4 A NBR gearbox Vario original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Width: 4 mm · Ø inside: 13 mm · Ø outside: 22 mm · Piaggio OEM number: 240222
EUR 5.40
swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: graphite colors · Ø External connection: 24 mm · Mounting type: Screws · Ø inside: 19 mm · Hole spacing inlet: 36 mm · Area of application: Tuning · Number of fixing points: 2 pcs
EUR 34.50
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: PHBG AS · Total length: 71.5 mm · Color: black · Width: 71 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Height: 123 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Camouflaged: No · Nozzle size: 85 · Size of secondary nozzle: 50
EUR 92.10
Collection only possible with online purchase and appointment.
