High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Width | 108 mm |
| Thread type | M5x0.8 (standard thread) |
| Height | 11 mm |
| Total length | 175 mm |
| Number of fixing points | 9 pcs, 2 pcs |
| Ø mounting hole | 6 mm |
| Hole spacing | 50 mm |
| Thread length | 6 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Plastic license plate holder (CH version)
Ø mounting hole: 6 mm · Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Width: 108 mm · Thread type: M5x0.8 (standard thread) · Height: 11 mm · Total length: 175 mm · Mounting type: Nuts & bolts · Thread length: 6 mm · Number of fixing points: 9 pcs · Hole spacing: 50 mm
EUR 9.40
Serrated lock washer M4 - M12 galvanized
Material: Steel · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
EUR 0.35
M6x22 hexagon head screw, galvanized
Material: Steel · Color: silver · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Surface: galvanized (blue) · Thread length: 22 mm · Total length: 26 mm · Screw head: Hexagon · Width across flats SW: 10 mm · Strength class: 8.8 · Number of components: 1 pcs
EUR 1.30
Screw M5x10 pan-head hexagon socket, galvanized
Material: Steel · Thread type: M5x0.8 (standard thread) · Drive: Hexagon socket · Surface: galvanized (blue) · Thread length: 10 mm · Total length: 13 mm · Screw head: Lens head · Width across flats SW: 3 mm · Ø External head: 9.5 mm · Shank: No · Strength class: 10.9
EUR 1.05
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Drive: Slot · Surface: nickel-plated · Thread length: 4 mm · Total length: 6 mm · Screw head: Lens head · Number of components: 2 pcs
EUR 2.35
Continental 2.00 - 2.50 x 16" tube
Valve type: TR6 car valve · Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Wheel size [inch]: 16 "
EUR 17.20
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Bulb holder: P26s · Housing material: Plastic · Color: black · Tension: 6 V · Tension: 12 V · Area of application: Original · Area of application: Standard · Lens material: Plastic · Width: 125 mm · Height: 90 mm · Number of fixing points: 2 pcs · Ø External connection: 6.3 mm · Test mark: none · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Mounting type: Screws · Depth: 147 mm · Piaggio OEM number: 584240
EUR 45.00
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Bulb holder: BA9s · Color: black · Color: red · Width: 130 mm · Height: 58 mm · Number of fixing points: 2 pcs · Test mark: none · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts · Depth: 43 mm
EUR 22.40
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1350 mm · Total length: 1600 mm · Outer shell length: 2000 mm · Total length: 2180 mm
EUR 23.60
Collection only possible with online purchase and appointment.
