Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The height or preload of the shock absorbers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 240 mm
With the plastic bushes supplied, the diameter at the attachment points can be reduced from 10 mm to 8 mm.
The rear springs should always be secured with large washers so that the plastic bushes of the suspension struts do not move if lateral forces occur.
| Manufacturer | MKX |
| Material | Steel, Aluminum |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Ø outside | 46 mm |
| Ø spars | 24 mm |
| Color | black |
| Ø Fastening inside | 8 mm, 10 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 320 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.90
EUR 2’590.00/l
YSS shock absorber Racing 32 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Color: black · Ø outside: 53 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Hole spacing: 355 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 165.30
MKX shock absorber 32 cm chrome
Manufacturer: MKX · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø spars: 24 mm · Color: Chrome · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Hole spacing: 320 mm · Mounting type: Nuts & bolts
EUR 59.00
Moped fans also bought
Not so nice 
Luggage carrier black | Puch Maxi S
Material: Steel · Color: black · Surface: varnished · Mounting type: Nuts & bolts · Total length: 425 mm · Width: 168 mm · Height: 32 mm · Ø mounting hole: 8.2 mm · Ø mounting hole: 8.8 mm · Hole spacing: 29 mm · Wheel size [inch]: 17 " · Number of fixing points: 4 pcs
EUR 23.50
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Material: Steel · Surface: varnished · Ø outside: 12.5 mm · Width: 170 mm · Height: 35 mm · Color: black · Total length: 420 mm · Number of fixing points: 4 pcs · Ø mounting hole: 8.1 mm · Hole spacing: 410 mm · Mounting type: Screws
EUR 35.30
KMC drive chain black 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Color: black · Color: gray · Surface: varnished · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.96 mm
EUR 27.10
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (known as Nirosta®) · Ø outside: 94 mm · Recording type: Cone mounting · Thickness: 22 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 141.70
Collection only possible with online purchase and appointment.
