Chrome-plated, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 360 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
The diameter can be shortened from 10 mm to 8 mm at the mounting points using the plastic bushes supplied.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
| Manufacturer | MKX |
| Surface | chrome-plated |
| Color | Chrome |
| Damping type | Spring |
| Adjustable | Yes |
| Ø Fastening inside | 8 mm, 10 mm |
| Ø spars | 24 mm |
| Ø outside | 46 mm |
| Mounting type | Nuts & bolts |
| Hole spacing | 360 mm |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon
EUR 21.20
Moped fans also bought
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Total length: 6 mm · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
EUR 18.80
Handlebar fork plate 30 cm curved with chrome strut
Clamping diameter: 22 mm · Manufacturer: Made in Germany · Ø outside: 22 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Width: 680 mm · Height: 270 mm · Fork plate holder length: 90 mm · Mounting type: Fork plate · Length handlebar ends: 155 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 280 mm
EUR 39.00
Transval speedometer drive 17" with grease nipple
Manufacturer: Transval · Ø outside: 41 mm · Material: Aluminum · Color: gray · 4-edge speedometer cable: 1.8 mm · Thread type: MF10x1 (fine pitch thread) · Ø axle: 11 mm · Overall width outside: 60 mm · Place of use: left · Place of use: right · Wheel size: 17 " · Total height: 52 mm · Ø mounting hole: 11 mm
EUR 35.40
Cut cable set Black | Sachs Automatic
Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 1650 mm · Total length: 1850 mm · Total length: 2200 mm · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Cylinder · Nipple shape: Pears
EUR 26.00
Magura cable clamp Ø 6 x 9
Width across flats: 6 mm · Manufacturer: Magura · Ø outside: 6 mm · Total length: 9 mm · Number of components: 1 pcs · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Material: Steel · Surface: blank · Surface: galvanized (blue) · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread length: 5 mm
EUR 2.35
Collection only possible with online purchase and appointment.
