Special exhaust for various Puch mopeds / mopeds which are equipped with a racing cylinder. The racing silencer fits cylinders with a narrow outlet.
This racing exhaust impresses with its solid construction and high-quality workmanship. The silencer is lined with stainless sheet steel (chrome steel).
Ideally, the tuning muffler should be used in conjunction with cylinder kits from 46 mm to exploit the full power.
Due to the huge resonance body, this racing muffler gives your moped a brute increase in power in the middle and upper speed range.
Mounting aids and other add-on parts can be found in the accessories section.
Handmade quality product from the manufacturer MLM.
| Manufacturer | MLM |
| Material | Steel |
| Color | black |
| Exhaust type | Cone / double cone |
| Mounting type | Welded lug |
| Number of fixing points | 1 pcs |
| Flame tube attachment | Flange |
| Puch | E50 |
Accessories & related products
Metrakit 47 mm cylinder kit 75 ccm
Material: Gray cast iron · Surface: varnished · Nominal diameter: 47 mm · Manufacturer: Metracite · Number of fixing points: 4 pcs · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Area of application: Tuning · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 401.80
Not in stock
Airsal 47 mm cylinder kit angled exhaust | Puch
Nominal diameter: 47 mm · Manufacturer: Airsal · Camouflaged: No · Surface: sandblasted · Displacement: 75 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 200.80
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Decompressor: No · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 248.10
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Ø inside: 27.4 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 8.75
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.70
EUR 26.00/l
Simonini carbon exhaust | Puch
Manufacturer: Simonini · Surface: varnished · Material: Steel · Mounting type: Welded lug · Total length: 875 mm · Ø Silencer: 60 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 30 mm · Ø outside: 90 mm · Exhaust type: Cone / double cone · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 259.90
Cable set cut with adjusting screws | Puch Maxi
Manufacturer: Made in Germany · Quantity: 4 pcs · Color: black · Material: Brass · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1120 mm · Outer shell length: 1150 mm · Total length: 1200 mm · Total length: 1250 mm · Total length: 1450 mm · Outer shell length: 1740 mm · Total length: 1830 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 41.30
DMP intake rubber Ø 33.5 / 33.5 x 31.5 with clamps
Manufacturer: DMP · Overall length (A): 31.3 mm · Color: black · Ø Passage (B): 30.7 mm · Material: Rubber · Ø inside (C): 33.5 mm · Ø inside 2 (D): 33.5 mm · Ø outside (E): 46.5 mm · Ø outside 2 (F): 46.5 mm · Ø External connection (G): 46.5 mm · Ø External connection 2 (H): 46.5 mm · Ø Clamping (I): 32.5 mm · Ø Clamping 2 (K): 32.5 mm
EUR 15.30
Rear fender blank | Puch Maxi S, Supermaxi LG1 / LG2
Material: Steel · Surface: blank / oiled · Color: silver · Mounting type: Weld · Folding the ends: not folded · Folding the ends: open folded · Shape of the mudguard: angular · Total length over ends: 420 mm · Scope: 480 mm · Wide mudguard profile: 73 mm · Wide mudguard profile: 75 mm · Height of mudguard profile: 30 mm · Height of mudguard profile: 60 mm · Total height from support surface to top edge: 110 mm · Wheel size [inch]: 17 "
EUR 35.30
Collection only possible with online purchase and appointment.
