The Ø 38 mm (50cc) racing cylinder kit from the quality brand Parmakit is suitable for Puch Maxi S, N | X30 Sport NS, NL | X30 Sport NG-2AH and Supermaxi.
This racing kit is of the best quality and is known for its long service life.
This racing kit should preferably be used with a 22 mm exhaust, i.e. a 2-bend or 22 mm manifold, so that the exhaust gases are also removed and no heat build-up occurs.
| Manufacturer | Parmakit |
| Material | Aluminum |
| Camouflaged | No |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 38 mm |
| Ø cylinder neck | 47.8 mm |
| Inlet window | 21.8 x 15.5 |
| Hole pattern [mm] | 44 x 44 |
| Ø outlet inside | 20 mm |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Hole spacing outlet | 42 mm |
| Decompressor | Yes |
| Outlet type | straight |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Hole spacing inlet | 38.5 mm |
| Area of application | Tuning |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Ratings
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Standard
EUR 39.00
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm · Area of application: Standard
EUR 8.80
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø outside: 15 mm · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.10
Explore categories from Cylinder
Moped fans also bought
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Height: 30 mm · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.00
swiing® revival clamping screw M5x20 Bing carburetor
Width across flats: 8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø shaft: 3.8 mm · Thread length: 8.5 mm · Total length: 24.1 mm · Screw head: Hexagon · Drive: External hexagon · Drive: Slot · Shank: Yes · Thread type: M5x0.8 (standard thread) · Shank length: 11.5 mm · Area of application: Original · Pony OEM number: A4593 · Sachs OEM no.: 0962 066 000
EUR 3.45
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Ø outside: 12.2 mm · Ø outside: 45 mm · Ø inside: 7.8 mm · Ø inside: 41 mm · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 5.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
