
Racing air filter with foam and plastic cap for your moped, moped and small motorcycle.
This racing air filter is particularly suitable for cross racing as it protects against rain and dirt. The well-placed intake openings ensure optimum air supply.
The air filter is clamped to the carburettor using a clamp.
Ø Carburettor connection: 32 mm
Connection angle: 90°
Total length: 140 mm
Quality product from the Italian manufacturer Polini.
| Manufacturer | Polini |
| Area of application | Tuning |
| Color | black, blue |
| Filter type | Foam |
| Total length | 140 mm |
| Ø Internal connection | 32 mm |
| Mounting type | Plug connection clamped |
| Angle | 90 ° |
| Camouflaged | No |
Accessories & related products
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm conical / straight
Color: black · Color: blue · Total length: 140 mm · Manufacturer: Polini · Height: 100 mm · Width: 150 mm · Camouflaged: No · Material: Foam · Material: Rubber · Area of application: Tuning · Filter type: Foam · Mounting type: Plug connection clamped · Mounting type: Screwed clamp · Length rubber part: 13 mm · Length of filter section: 127 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm
EUR 71.10
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm cylindrical / angled
Manufacturer: Polini · Material: Foam · Camouflaged: No · Material: Rubber · Color: blue · Color: gray · Filter type: Foam · Length rubber part: 11.3 mm · Ø outside: 95 mm · Length of filter section: 60 mm · Length of filter section: 85 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 46 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Total length: 100 mm · Angle: 75 ° · Mounting type: Plug connection clamped · Mounting type: Screwed clamp · Area of application: Tuning
EUR 71.10
Explore categories from Carburetor & intake system
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.80
Dell'Orto 19 mm PHBG CS carburetor hand choke
Color: black · Total length: 82 mm · Manufacturer: Dell'Orto · Height: 124 mm · Width: 70 mm · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Carburetor type: PHBG CS · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Nominal diameter: 19 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 142.30
Bumm mirror round Inox
Manufacturer: Bumm · Test mark: none · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: M8x1.25 (standard thread) · Total length: 360 mm · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Clamping diameter: 22 mm · Mirror rod length: 300 mm · Thread size: M8
EUR 33.10
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
EUR 24.80
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Manufacturer: AKOA · Material: Plastic · Color: black-matt · Ø inside: 20.7 mm · Ø External connection: 26 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 35.50
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 2200 mm · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.80









