High-quality 21 mm CP carburetor kit with clamp connection for your moped, moped and small motorcycle.
The set was designed by Polini for the Puch Maxi S, N moped / moped models with E50 engine, but can also be used universally for countless other makes and models.
During the development of the CP models, special emphasis was placed on size and weight, making this carburetor particularly compact and around 40% lighter than conventional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This should simplify the tuning of the carburetor and enable high performance with low consumption. In addition, all CP carburetors have an oil and vacuum connection.
| Nominal diameter | 21 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Mounting type | Plug connection |
| Carburetor type | CP |
| Ø without reducing sleeve | 25 mm |
| Ø Internal connection | 24 mm |
| Ø Air filter connection | 46 mm |
| Ø fuel hose connection | 6 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Cable choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 100 |
| Size of secondary nozzle | 40 |
| Area of application | Tuning |
| Puch |
Accessories & related products
Polini 24 mm carburetor (hand choke)
Nominal diameter: 24 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Mounting type: Plug connection · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning
EUR 177.10
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Quantity: 10 pcs · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
EUR 47.20
Polini jet set (140 - 158) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Quantity: 10 pcs · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 140 · Nozzle size: 142 · Nozzle size: 144 · Nozzle size: 146 · Nozzle size: 148 · Nozzle size: 150 · Nozzle size: 152 · Nozzle size: 154 · Nozzle size: 156 · Nozzle size: 158
EUR 47.20
Not in stock
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Total length: 83 mm · Nominal diameter: 26 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 105 · Size of secondary nozzle: 45 · Width: 65 mm · Height: 155 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 171.20
Polini 32 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Total length: 83 mm · Nominal diameter: 32 mm · Ø Inside entrance: 32 mm · Ø Output inside: 32 mm · Ø Air filter connection: 55 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 122 · Size of secondary nozzle: 42 · Width: 78 mm · Height: 155 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 224.40
Polini racing exhaust "for race" blanco | Puch Maxi, X30
Manufacturer: Polini · Material: Steel · Surface: blank · Total length: 900 mm · Ø Silencer: 60 mm · Number of fixing points: 2 pcs · Exhaust type: Cone / double cone · Flame tube attachment: Flange · Flame tube attachment: suspended
EUR 437.10
Moped fans also bought
GPO 45 mm cylinder kit 70 ccm | Puch
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 24.6 mm · Inlet window: 21.8 x 14.6 · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 118.10
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Total length: 28 mm · Color: blue · Number of components: 3 pcs
EUR 21.20
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
EUR 18.80
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Total length: 135 mm · Height: 55 mm · Number of fixing points: 4 pcs · Candle thread: short · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Width: 125 mm
EUR 38.90
Athena 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Athena · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 23.5 mm · Inlet window: 22.3 x 14 · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 187.80
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Quantity: 10 pcs · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
EUR 47.20
GPO 12 mm intake manifold Puch X30 NG-2AH
Manufacturer: GPO · Material: Aluminum · Total height: 63 mm · Ø inside: 12 mm · Total length: 53 mm · Height flange center hole: 52.5 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Camouflaged: No · Hole spacing inlet: 32 - 38 mm · Area of application: Original
EUR 47.20
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 4.3 mm · Color: red · Ø outside: 8.45 mm · Total length: 26.6 mm · Number of components: 3 pcs · Area of application: Tuning
EUR 21.20
Collection only possible with online purchase and appointment.
