Shaft seal oil seal (colloquially known as oil seal) with sealing lip made of PTFE (colloquially known as Teflon) with the dimensions 15/24/5 mm (15x24x5) for use on the crankshaft on your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
This radial shaft seal with fluorine rubber outer jacket is resistant up to a temperature of 200°C, whereas conventional NBR shaft seals are only resistant up to 100°C.
This radial seal ring made of FPM / FKM (commonly known as Viton) has an additional sealing lip made of PTFE, a material with a high thermal load capacity that does not interact with the lubricant and can therefore withstand the highest loads.
You can find more sealing rings for your Piaggio in the accessories section.
Quality product from the Italian manufacturer Polini.
Manufacturer: Polini · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized · Area of application: Racing · Place of use: Universal · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm
| Place of use | Crankshaft |
| Shaft seal type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Manufacturer | Polini |
| Material | FPM / FKM (colloquially known as Viton) |
| Surface | rubberized |
| Ø inside | 15 mm |
| Ø outside | 24 mm |
| Temperature resistance (min.) | -30 - 200 °C |
| Width | 5 mm |
| Area of application | Racing |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Malossi oil seal FPM 15/24/5 A crankshaft | Piaggio Ciao, SI, Bravo, Boxer
Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Malossi · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized · Width: 5 mm · Place of use: Crankshaft · Ø inside: 15 mm · Temperature resistance (min.): -30 - 200 °C · Ø outside: 24 mm
EUR 16.50
Oil seal FPM 15/24/5 AS crankshaft original | Piaggio Ciao, SI, Bravo & Boxer
Place of use: Crankshaft · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Piaggio · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized
EUR 10.50
Explore categories from Seals & gaskets
Moped fans also bought
- 12 %
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard · Nipple length: 10 mm
EUR 2.75
EUR 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
EUR 2.30
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Screw head: Hexagon · Total length: 25 mm · Thread length: 19.5 mm · Number of components: 6 pcs · Thread type: M7x1 (standard thread) · Ø outside: 11 mm · Width across flats: 11 mm · Area of application: Standard
EUR 4.50
swiing® revival needle roller bearing 12/15/14.2 original
Bearing cage: Sheet steel cage · Manufacturer: swiing® revival parts · Bearing type: Needle sleeve · Ø outside: 15 mm · Ø inside: 12 mm · Width: 14.2 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 155 001
EUR 10.30
Polini oil seal FPM / PTFE 15/24/5
Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Polini · Material: FPM / FKM (colloquially known as Viton) · Area of application: Racing · Surface: rubberized · Ø outside: 24 mm · Ø inside: 15 mm · Width: 5 mm · Place of use: Universal · Temperature resistance (min.): -30 - 200 °C
EUR 16.70
Collection only possible with online purchase and appointment.
