High-end CNC aluminum transmission cooler for your moped / moped with Puch E50 engine.
Thanks to improved cooling, the clutch works more stress-free. However, this technical miracle also lowers the temperature at the cylinder head.
All components from your original engine can be used, only the cooling fin is fitted in between. Due to the different threads, you have a variety of connection options, such as a temperature sensor.
The following components are included in the scope of delivery:
1x cooling fin, black anodized aluminium
2x seal
1x aluminium bushing
3x O-ring seal
1x hose nozzle
1x circlip / retaining ring
4x countersunk hexagon socket screws M6 x 55 (fastening of cooler / coupling cover)
| Material | Aluminum |
| Surface | anodized |
| Width | 32 mm |
| Color | black-matt |
| Ø inside | 107 mm |
| Ø outside | 150 mm |
| Puch | E50 |
Accessories & related products
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Hole spacing: 138 mm · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Ø outside: 130 mm · Total length: 170 mm · Number of fixing points: 2 pcs
EUR 177.90
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Diameter: 5.9 mm · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Width across flats: 10 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
PVL Analog Ignition Coil 105458 / 458115
Manufacturer: PVL · Place of use: External (outside the ignition) · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Color: black · Mounting type: Screws · Ø mounting hole: 6 mm · Number of fixing points: 2 pcs
EUR 117.40
PVL stator "1443" ignition
Manufacturer: PVL · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Color: black · Number of cables: 2 pcs · Number of fixing points: 3 pcs
EUR 117.40
Hot
GPO fuel tap horizontal M12x1 (with union nut) bottom outgoing | Puch Maxi S, N
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 11.80
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm oval / straight
Manufacturer: Polini · Area of application: Tuning · Material: Foam · Material: Rubber · Color: black · Color: blue · Filter type: Foam · Length rubber part: 13 mm · Width: 150 mm · Height: 100 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Mounting type: Plug connection clamped · Mounting type: Screwed clamp · Total length: 140 mm · Camouflaged: No
EUR 71.10
Working late? Evening hours on Thursday until 20:00
