Classic saddle seat with black imitation leather cover, suitable for your Piaggio Boxer BTV2 moped / moped.
The black painted base frame and the locking latch are made of metal.
The seams on the seat base are neatly finished and the hardness of the upholstery is chosen so that your rear end can withstand longer rides without damage.
Mounting thread for hinge: M6 x 14 mm
Distance center / center thread: 40 mm
Seat length: 490 mm
Rear width: 180 mm
Front width: 140 mm
Front upholstery height: 120 mm
Rear upholstery height: 135 mm
Note: As far as we are aware, this saddle was only fitted to Italian and German versions of the Boxer and therefore requires its own construction in order to be mounted and unfolded on the Swiss frame.
Other parts for your Piaggio Boxer can be found in the accessories section.
Original Piaggio spare part number: 135676
A quality product made in Italy.
Details
| Manufacturer | Made in Italy |
| Material | Imitation leather |
| Width | 180 mm, 140 mm |
| Total length | 490 mm |
| Height | 120 mm, 135 mm |
| Spring-loaded | Yes |
| Color | black |
| Lettering | No |
| Piaggio OEM number | 135676 |
Suitable for the following models
| Piaggio | Boxer |
Accessories & related products
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
EUR 168.70
Handlebar with stem 26 cm | Piaggio Boxer
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Front boom mounting · Ø outside: 22 mm · Ø Stem: 22 mm · Stem height: 160 mm · Height: 260 mm · Length handlebar ends: 170 mm · Width: 600 mm · Crossbar: No
EUR 75.60
Moped fans like you also bought:
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Total length: 175 mm · Material: Steel · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Thread length: 34 mm · Thread length: 45 mm · Shank length: 95.6 mm
EUR 27.80
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Total length: 106 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Diameter: 5.9 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.65
HPI stator ignition
Ø inside: 27.5 mm · Ø outside: 90 mm · Manufacturer: HPI · Material: Aluminum · Number of cables: 4 pcs · Surface: anodized · Performance: 60 W · Ø bolt circle: 80 mm · Color: black · Tension: 12 V · Cable length: 640 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 6 pcs
EUR 174.50
Collection only possible with online purchase and appointment.
