High-quality center kickstand for Piaggio Ciao mopeds / mopeds with 14 mm bolts.
This center kickstand was fitted as standard on the newer PX and C24 models.
The center rod is supplied complete with spring, bolt (Ø14x100 mm) and circlips (fuel rings).
Note: Older spoke wheel models had a 10 mm bolt. However, the hole in the P and SC models was often drilled out so that a spokes with a 14 mm axle can be fitted. Check the dimensions of the bolt before purchasing.
You can find more parts for your Piaggio Ciao as well as the main stem with 10 mm bolt in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 25523001
| Material | Steel |
| Manufacturer | Made in Italy |
| Surface | varnished |
| Color | black |
| Stand base - center mount (A) | 232 mm |
| Total width of stand base (B) | 200 mm |
| Wide receptacle (C) | 78 mm |
| Ø Receptacle (D) | 14 mm |
| Wide upright foot (F) | 20 mm |
| Total height | 250 mm |
| Piaggio | Ciao - PX, C24 |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Material: Steel · Surface: varnished · Color: black · Total length: 690 mm · Manufacturer: SITO · Mounting type: Welded lug · Number of fixing points: 1 pcs · Ø Silencer: 70 mm · Ø outside: 14 mm · Ø Internal connection: 22 mm · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Flame tube attachment: Plug connection clamped
EUR 88.50
Not in stock
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Material: Gray cast iron · Manufacturer: Malossi · Surface: sandblasted · Nominal diameter: 43 mm · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 63 ccm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø piston pin (B): 10 mm · Area of application: Tuning · Ø outlet inside: 18.3 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes
EUR 171.30
Main stand 10 mm axle without bolt | Piaggio Ciao P, SC
Material: Steel · Surface: varnished · Color: black · Manufacturer: Made in Italy · Stand base - center mount (A): 230 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 77 mm · Ø Receptacle (D): 10 mm · Wide upright foot (F): 20 mm · Total height: 250 mm · Piaggio OEM number: 104626
EUR 35.30
Main stand 14 mm axle | Piaggio Ciao PX, C24
Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 230 mm · Total width of stand base (B): 210 mm · Wide receptacle (C): 80 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 15 mm · Total height: 245 mm · Piaggio OEM number: 25523001
EUR 27.10
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio Ciao PX, C24
Total length: 46 mm · Width: 60 mm · Height: 96 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Mounting type: Plug connection clamped · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Nominal diameter: 13 mm · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm
EUR 79.10
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.70
Headlight black | Piaggio Ciao PX, C24
Width: 125 mm · Height: 90 mm · Manufacturer: Made in Italy · Mounting type: Screws · Number of fixing points: 2 pcs · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Switch included: Yes · Color: black · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Ø External connection: 6.3 mm · Depth: 147 mm · Speedometer recording: 48 mm · Area of application: Original · Area of application: Standard · Battery operated: No · Piaggio OEM number: 584240
EUR 44.80
Tail light black | Piaggio Ciao PX, C24, Bravo
Material: Plastic · Color: black · Color: red · Width: 130 mm · Height: 58 mm · Manufacturer: Made in Italy · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Test mark: none · Depth: 43 mm · Bulb holder: BA9s · Brake light: No · Battery operated: No · Reflectors: Yes
EUR 22.30
GPO control bearing set | Piaggio Ciao
Material: Steel · Surface: galvanized (blue) · Bearing type: Bearing ring · Color: silver · Height: 10.5 mm · Height: 17 mm · Manufacturer: GPO · Ø outside: 41.4 mm · Ø outside: 42 mm · Ø inside: 27 mm · Ø mounting frame: 30.05 mm · Thread type: FG25.4 (1" 24G) · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
EUR 22.30
Not in stock
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 23.50
GPO chain tensioner | Piaggio Ciao
Width: 45 mm · Manufacturer: GPO · Total length: 64 mm · Number of fixing points: 1 pcs · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Number of teeth: 8 pcs · Ø outside sprocket: 33 mm · Thread type: M8x1.25 (standard thread)
EUR 11.10
Collection only possible with online purchase and appointment.
