Montageanleitung
Set
Hot 
Market innovation: first 38 mm racing cylinder made of aluminum with round slotted intake for Sachs 2-, 3- and 4-speed engines with blower clutch, which were installed on Hercules 50/ALS, 50/2 S, 50/KS, 50/2 DK, 50/3 LS, 50/4 LKS, Gritzner etc.
The tuned aluminum cylinder has been developed and tested for many years in Switzerland.
The tuned aluminum cylinder was developed and tested for years in Switzerland and is now finally available exclusively from us.
Despite the original displacement, this tuning kit turns your oldie into a powerhouse with 4.01 Nm and 4.5 hp at the rear wheel thanks to optimized timing, larger intake and exhaust as well as enlarged overflow channels.
In conjunction with the corresponding 13 mm SSB or 16 mm SHA carburettor with intake flange and resonance exhaust, a moderate increase in performance can be expected compared to the original cylinder.
A selection of performance-enhancing and supplementary add-on parts can be found in the accessories section.
The scope of delivery includes cylinder, piston kit, cylinder head, gasket set, intake studs and cylinder studs including special nuts.
The cylinder head, which can only be used for cylinders in this series, is equipped with a raceway centering system. This ensures that the combustion chamber is perfectly aligned and the piston is not at TDC.
Hole pattern [mm]: 60 x 40 / 37 x 37 · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Nominal diameter: 38 mm · Ø cylinder neck: 44.9 mm · Ø outlet inside: 19.6 mm · Ø Inlet inside: 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Thread outlet: M35x2 (standard thread) · Number of fixing points: 8 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 37 x 37 · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 - 41 mm · Ø outside: 95 mm · Camouflaged: No · Number of fixing points: 5 pcs · Ø screw holder: 6.7 mm · Candle thread: short · Decompressor: M10x1.5 · Total length: 125.6 mm · Height: 46.7 mm · Area of application: Tuning
| Nominal diameter | 38 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Area of application | Racing |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 42 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 31 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | Union nut |
| Number of fixing points | 4 pcs |
| Thread outlet | M35x2 (standard thread) |
| Hole pattern [mm] | 51 x 40 |
| Camouflaged | No |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Ratings
Accessories & related products
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Total length: 82 mm · Color: black · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 82 · Area of application: Tuning · Width: 72 mm · Height: 111 mm
EUR 83.50
Loctite 638 Joining shaft-hub high-strength 10 ml
Temperature resistance (min.): -75 - 150 °C · Color: green · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 26.20
EUR 2’620.00/l
GPO exhaust set Ø 28 / 60 mm original | Sachs 50/2
Surface: chrome-plated · Manufacturer: GPO · Color: Chrome · Material: Steel · Ø outside: 60 mm · Mounting type: Screwed clamp · Ø Internal connection: 25.8 mm · Ø Flame tube outside: 28 mm · Exhaust type: Flute · Flame tube attachment: Union nut
EUR 191.00
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Sachs 50/2
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Union nut
EUR 179.10
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Total length: 132 mm · Choke control: without choke · Width: 87 mm · Ø fuel hose connection: 6 mm · Hole spacing inlet: 31 mm · Nozzle size: 75 · Height: 85 mm · Mounting type: Flange · Mixed oil connection: No · Vacuum connection: No
EUR 151.60
Not in stock
swiing® ingenious stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing® ingenious parts · Diameter: 6 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Total length: 27.3 mm · Drive: External hexagon · Width across flats: 8 mm · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9
EUR 23.10
swiing® ingenious piston 38 mm | Sachs 50/2
Nominal diameter: 38 mm · Manufacturer: swiing® ingenious parts · Ø outside piston (A): 37.96 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Weight piston kit: 81 g
EUR 69.90
swiing® ingenious 16 mm intake manifold Dell'Orto SHA | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Area of application: Tuning · Color: graphite colors · Ø inside: 16 mm · Ø External connection: 19 mm · Hole spacing inlet: 31 mm · Number of fixing points: 2 pcs · Mounting type: Screws
EUR 58.40
Moped fans also bought
swiing® revival exhaust nut M35x2 galvanized | Sachs 50/2 (A1507)
Material: Steel · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Nut type: Union nut · Ø outside: 43 mm · Ø inside: 30 mm · Thread type: M35x2 (standard thread) · Pony OEM number: A1507 · Sachs OEM no.: 0242 048 101
EUR 17.80
Clutch basket & hub | Sachs 50/2, 503 (A2508/A2947)
Color: graphite colors · Material: Steel · Toothing type: helical toothed · Recording type: Interlocking · Number of teeth: 16 pcs · Number of teeth: 62 pcs · Ø inside: 22.5 mm · Height: 41.5 mm · Ø outside: 100 mm · Ø outside: 110 mm · Area of application: Standard · Pony OEM number: A1201 · Pony OEM number: A2947 · Sachs OEM no.: 0234 068 000 · Sachs OEM no.: 0290 035 005
EUR 113.40
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Total length: 132 mm · Choke control: without choke · Width: 87 mm · Ø fuel hose connection: 6 mm · Hole spacing inlet: 31 mm · Nozzle size: 75 · Height: 85 mm · Mounting type: Flange · Mixed oil connection: No · Vacuum connection: No
EUR 151.60
Not in stock
swiing® ingenious stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing® ingenious parts · Diameter: 6 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Total length: 27.3 mm · Drive: External hexagon · Width across flats: 8 mm · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9
EUR 23.10
Collection only possible with online purchase and appointment.
