Hot 
High-quality Ø 90x17 mm brake pads with return tension spring for the front and rear drum brake on your moped, moped and small motorcycle.
The lining is slotted at an angle. This ensures better heat and brake dust dissipation, resulting in an increased braking effect. Due to their uncompromising braking power, these brake pads are primarily used in racing applications.
| Width | 17 mm |
| Slotted | Yes |
| Manufacturer | swiing® ingenious parts |
| Springs included | Yes |
| Ø locating bolt | 10 mm |
| Color | silver |
| Number of springs | 1 pcs |
| Ø drum | 90 mm |
| Area of application | Racing |
Ratings
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Ø outside: 10 mm · Number of components: 3 pcs · Material: Steel · Area of application: Special tool · Total length: 41.1 - 65 mm · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Thread length: 30 mm
EUR 19.00
Explore categories from Drum brake
Moped fans also bought
- 12 %
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Surface: blank / oiled · Ø bore: 4 mm
EUR 14.40
EUR 12.60
- 12 %
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Surface: galvanized (blue)
EUR 2.75
EUR 2.40
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing cage: Sheet steel cage ball-guided · Ø inside: 25 mm · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø outside: 36 mm · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Stock number: K042 · Area of application: Standard · Bearing type: Ball ring · Width: 6.8 mm · Ball bearing closed: No
EUR 9.10
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.40
EUR 10.30
EUR 22.89/l
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing cage: Sheet steel cage ball-guided · Ø inside: 14 mm · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Ø outside: 27 mm · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Stock number: K1052 · Bearing type: Ball ring · Surface: blank · Ball bearing closed: No
EUR 7.95
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Ø outside: 10 mm · Number of components: 3 pcs · Material: Steel · Area of application: Special tool · Total length: 41.1 - 65 mm · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Thread length: 30 mm
EUR 19.00
Collection only possible with online purchase and appointment.
