Hot 
Engine mounting bracket 2.0! Reworked version with improved motor mount holder.
Only usable in conjunction with the new motor mounts 2.0. Not suitable for the conventional engine mounts!
No more need to place wooden blocks under the engine during engine revisions or tilt the engine when tightening the screws.
We offer you an exclusive engine assembly tool with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The engine can be fixed in any conceivable position at an ergonomic height on a 360° swivel axis.
The stand can be firmly screwed to the base at 4 points.
Base plate dimensions: 25 x 25 cm
Distance from pivot point to base: 32 cm
You can find the matching motor holders in the accessories section below.
Fig. 3 shows the motor mounting stand with a mounted motor holder for illustration purposes. Scope of delivery according to picture 1 & 2.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | varnished |
| Color | white, red |
| Ø Receptacle | 25 mm, 35 mm |
| Material thickness | 3.5 mm |
| Hole spacing | 21.5 mm |
| Total length | 370 mm |
| Width | 245 mm |
| Height | 340 mm |
| Area of application | Motor bracket |
| Puch | |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 514 Beta 518 Beta 519 Beta 521 (engine) Beta 520 |
| Piaggio | |
| Zündapp Belmondo | |
| DKW | |
| Kreidler | Flory MF |
Ratings
Accessories & related products
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8 · Number of components: 1 pcs · Area of application: (Dis)assembly tool
EUR 11.80
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Total length: 57 mm · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 23.70
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Ø outside: 93 mm · Ø inside: 27 mm · Total length: 290 mm · Thickness: 5 mm · Height: 80 mm · Number of components: 1 pcs · Ø Pin: 8 mm · Area of application: Special tool
EUR 57.10
Collection only possible with online purchase and appointment.
