Montageanleitung 
Hot 
The high-quality 38 mm original cylinder is now also available exclusively with «Vertex» pistons.
This cylinder fits various Puch mopeds / mopeds such as Maxi S / N, Puch X30 NS / NL, Puch X30 NG-2A.
Vertex pistons are world-renowned for their quality and design.
With this cylinder, you will reach your destination quickly and powerfully.
- The intake window has been moved slightly downwards to achieve better timing
- Lubrication holes on the piston to the piston pin.
- The inner flats on the piston were milled flat for clean guidance of the connecting rod bearing
- The piston skirt has been optimized
- The inlet angles of the transfer ports have been adjusted
- Intake and exhaust largely milled flat (exhaust and intake manifold can be fitted without any problems)
With these optimizations, the 38 mm cylinder kit delivers a full 1.6 hp to the rear tire with the correct setting. This makes it the most powerful 38 mm cylinder with seal for Puch ever!
Of course, the original «CH12» is also cast in.
Note: Please note the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Attention: This cylinder is a reproduction product which is not approved for use on public roads.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Camouflaged | Yes |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 38 mm |
| Ø cylinder neck | 48 mm |
| Ø outlet inside | 20 mm |
| Ø Inlet inside | 9 mm |
| Ø piston pin (B) | 12 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Area of application | Standard |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | Yes |
| Hole spacing inlet | 38 mm |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Area of application: Standard · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.00
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 106 mm · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
EUR 2.15
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Thickness: 0.39 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 1.7 mm · Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Ø cylinder: 38 mm · Ø outlet inside: 20 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm
EUR 8.80
swiing® revival piston 38 mm Vertex | Puch
Manufacturer: Vertex · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Tolerance group: A · Weight piston kit: 71 g
EUR 71.10
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Ø inside: 12 mm · Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.10
Explore categories from Cylinder
Moped fans also bought
Hot
BERU spark plug connector 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.40
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Area of application: Standard · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.00
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm
EUR 11.80
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22.40
Hot
swiing® revival 12 mm carburetor "original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: gray · Carburetor type: SRE · Width: 50 mm · Total length: 65 mm · Height: 108 mm · Nominal diameter: 12 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Area of application: Standard · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.15 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 82.90
swiing® revival 12 mm intake manifold | Puch E50
Ø inside: 12 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Ø External connection: 20 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Total length: 45.5 mm · Area of application: Original · Total height: 53 mm · Height flange center hole: 43 mm · Hole spacing inlet: 38 mm
EUR 41.40
swiing® revival 12 mm carburetor set "original" | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 12 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Flange · Mounting type: Plug connection clamped · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Area of application: Standard · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m
EUR 112.60
GPO 38 mm cylinder head Racing high-compression | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø screw holder: 7.4 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Candle thread: short · Hole pattern [mm]: 45 x 45 · Decompressor: No
EUR 59.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
