Brake cam suitable for brake anchor plates on the front wheel of your Puch Maxi S & N moped.
This CNC turned part fits all old brake discs where the brake cams and the brake lever are bolted together.
The galvanized brake cam is in no way inferior to the original SGDG / LELEU brake cams in terms of workmanship and functionality.
Width of square: 9 x 9 mm
Width of diagonal: 6 mm
Total length: 38.2 mm
Thread: M6x1 mm
Material: steel
Surface: galvanized
Complete brake anchor plates, brake shoes and the cam for the rear wheel can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Material | Steel |
| Manufacturer | swiing® revival parts |
| Surface | galvanized (blue) |
| Height | 38.2 mm |
| Thread type | M6x1 (standard thread) |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) |
Accessories & related products
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Material: Chrome steel (known as Nirosta®) · Drive: Outer edge · Total length: 32 mm · Manufacturer: GPO · Number of components: 3 pcs · Area of application: Standard · Ø External head: 14 mm · Thread type: MF10x1 (fine pitch thread) · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Width across flats SW: 13 mm · Thread length: 13 mm · Width across flats SW: 17 mm
EUR 15.30
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Ø axle: 12 mm · Total length: 187 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø outside: 91 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
EUR 82.60
swiing® revival rear brake anchor plate | Puch Maxi N
Material: Steel · Surface: galvanized (blue) · Total length: 135 mm · Manufacturer: swiing® revival parts · Ø outside: 92 mm · Ø axle: 12 mm · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
EUR 88.50
Moped fans also bought
GPO license plate holder Inox (CH version)
Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (known as Nirosta®) · Color: silver · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm
EUR 12.90
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Manufacturer: Magura · Total length: 15 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Ø outside: 8 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Area of application: Standard · Width across flats SW: 7 mm · Thread length: 7 mm
EUR 2.95
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant
EUR 11.10
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.70
Collection only possible with online purchase and appointment.
